Breville Coffee Machine Error E15

⚡ Quick Answer: The Breville coffee machine error E15 indicates a water leakage detection issue, often signaled by a continuous beeping sound and a flashing display. ... ✅ DIY Fixable

What Does Error E15 Mean?

The Breville coffee machine error E15 indicates a water leakage detection issue, often signaled by a continuous beeping sound and a flashing display. This error is commonly associated with the steam wand startup, where the machine fails to produce steam due to potential issues with the NTC temperature sensor or steam system. Addressing this promptly can prevent further complications.

Common Symptoms:

  • Machine displays E15/ER15 on screen
  • Steaming function fails to start or no steam produced
  • Error occurs during or before steam wand operation

Possible Causes

  • Steam wand startup (NTC temperature sensor/steam system issue) (medium)

How to Fix Error E15

DIY Fix Basic checks & cleaning

  1. Turn machine off and unplug
  2. Clean the steam wand thoroughly to remove milk residue or blockages
  3. Ensure water tank is properly filled and seated
  4. Power cycle machine and retry steaming function

Technician Only Inspect and service steam wand components

  1. Open machine (qualified technician) to access steam wand internal assembly
  2. Inspect and test NTC temperature sensor for proper connection and resistance behavior
  3. Check for damage or degradation of boiler O‑ring and steam valve components
  4. Replace faulty sensor or steam wand assembly if needed

Parts needed: NTC temperature sensor for steam system, Steam wand assembly/O‑rings

🛑 When to Call a Pro:
  • If the error persists after cleaning and basic resets
  • If internal components (sensor or wand) show physical damage
  • If machine is under warranty — contact Breville support

Next step

Choose the next step for E15

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Coffee Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 1600W
component Water Level Sensor
resistance 5-10 ohms
part_number BES870XL-SENSOR
voltage_rating 120V AC

Common Questions

What does E15 error mean on breville coffee machine?

E15 indicates a water leakage detection issue related to steam wand operation.

Can I fix breville coffee machine E15 error myself?

Yes, you can clean the steam wand and check the water tank.

How much does it cost to fix E15 error?

Repair costs range from $50 to $200+, depending on parts and service.

When should I call a technician for E15?

Call a technician if the error persists after cleaning or if components show damage.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!