Breville Coffee Machine Error E02
⚡ Quick Answer: The Breville coffee machine E02 error indicates a temperature sensor (NTC) failure, preventing the machine from heating or brewing coffee. This error ... ✅ DIY Fixable
What Does Error E02 Mean?
The Breville coffee machine E02 error indicates a temperature sensor (NTC) failure, preventing the machine from heating or brewing coffee. This error may occur immediately upon powering on or just before the brewing cycle starts. Users may also notice unusual noises during operation. To resolve this, basic checks like resetting the machine and ensuring the water reservoir is filled can be attempted. If the error persists, replacing the faulty temperature sensor is recommended.
Common Symptoms:
- Machine fails to heat or brew when the error displays.
- Error appears immediately upon power on or before brewing cycle begins.
Possible Causes
- Temperature sensor (NTC) failure or fault (medium)
How to Fix Error E02
DIY Fix Basic checks and reset
- Turn off and unplug the machine from its power source.
- Wait 10–30 seconds and plug the machine back in to perform a basic reset.
- Ensure the water reservoir is filled and correctly seated.
- Try powering it on again to see if the error clears.
Technician Only Inspect and replace faulty temperature sensor (NTC)
- Disconnect power and remove access panels to reach the internal temperature sensor (NTC).
- Test the sensor with a multimeter to verify if it is functioning within expected resistance values.
- Replace the temperature sensor if it fails testing.
- Reassemble the machine and test under controlled conditions.
Parts needed: Temperature sensor (NTC), Screws and insulating components as needed
- If the error persists after resets and basic user checks.
- If there is evidence of internal damage, burning smells, or repeated temperature faults.
- If you are not comfortable opening the machine or testing internal electrical components.
Next step
Choose the next step for E02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Coffee Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 150W |
|---|---|
| component | Water Pump |
| resistance | 20-30 ohms |
| part_number | BES870XL-PUMP |
| voltage_rating | 120V AC |
Common Questions
What does E02 error mean on breville coffee machine?
E02 indicates a temperature sensor (NTC) failure, preventing heating and brewing.
Can I fix breville coffee machine E02 error myself?
Yes, try resetting the machine and ensuring the water reservoir is filled.
How much does it cost to fix E02 error?
Repair costs for the E02 error range from ¥3,000 to ¥8,000, depending on the model.
When should I call a technician for E02?
Call a technician if the error persists after resets or if there are signs of internal damage.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!