Breville Coffee Machine Error E10

⚡ Quick Answer: The Breville coffee machine error E10 indicates a malfunction related to the water pump, often resulting in unusual noises and an inability to brew co... ✅ DIY Fixable

What Does Error E10 Mean?

The Breville coffee machine error E10 indicates a malfunction related to the water pump, often resulting in unusual noises and an inability to brew coffee. To troubleshoot, power-cycle the machine by unplugging it for about 30 seconds and then plugging it back in. Check that the water reservoir is correctly placed and filled, and ensure that the machine is clean based on maintenance instructions. If the error persists, further diagnosis may be needed.

Possible Causes

  • Water Pump Assembly
  • Clogged Water Filter
  • Faulty Wiring

How to Fix Error E10

DIY Fix General Troubleshooting Steps When Facing an Unidentified Error Code

  1. Power‑cycle the machine: unplug it from the power outlet, wait ~30 seconds, then plug it back in and restart.
  2. Check basic machine conditions such as water reservoir placement, water level, and whether any obvious lights are flashing.
  3. Ensure the machine is clean and descale/clean according to your model’s maintenance instructions if frequent error codes appear.
  4. Consult your specific model’s user manual for documented error codes and meanings, or contact Breville support if your manual lists E10.

Technician Only Service Diagnosis for Unidentified Error Code

  1. Connect to Breville’s official support to request model‑specific documentation or diagnostics for ‘E10’.
  2. Run professional diagnostics to read internal logs or sensor statuses tied to this error code.
  3. Check control board and system firmware for faults if no simple user‑level cause is found, as community sources link similar codes (ER10) to system/control issues. [TechFaultFix](
🛑 When to Call a Pro:
  • If the error persists after basic troubleshooting (power cycle, checking water and cleanliness), contact Breville customer support or a qualified technician for model‑specific diagnosis.
  • If any unusual noises, smells, or other malfunctions occur concurrently with the error.

Technical Specifications

wattage 1500W
component Water Pump Assembly
resistance 30-50 ohms
part_number BES870PUMP
voltage_rating 120V AC

Common Questions

What does E10 error mean on Breville coffee machine?

E10 indicates a malfunction related to the water pump, causing brewing issues.

Can I fix Breville coffee machine E10 error myself?

Yes, try power-cycling the machine and checking the water reservoir and cleanliness.

How much does it cost to fix E10 error?

Repair costs vary by model and region; contact a technician for an estimate.

When should I call a technician for E10?

Call a technician if the error persists after basic troubleshooting or if you notice unusual noises.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!