Black & Decker Washing Machine Error E3
⚡ Quick Answer: The E3 error code on your Black+Decker washing machine indicates a drainage-related issue. This may manifest as the machine stopping mid-cycle, with w... ✅ DIY Fixable
What Does Error E3 Mean?
The E3 error code on your Black+Decker washing machine indicates a drainage-related issue. This may manifest as the machine stopping mid-cycle, with water not draining properly or the spin cycle failing to proceed. The likely cause is a blockage or obstruction in the drainage system, including the drain hose or pump filter.
Common Symptoms:
- Error E3 displayed
- Machine stops mid‑cycle
- Water not draining or spin cycle not proceeding
Possible Causes
- Drainage blockage or pump obstruction (medium)
How to Fix Error E3
DIY Fix Check and clear drainage path
- Unplug the appliance and turn off water
- Inspect drain hose for kinks or obstructions
- Check and clean pump filter (if accessible)
- Re‑seat hose and restart machine
Technician Only Inspect internal drainage and sensor components
- Test drain pump operation and electrical continuity
- Remove and inspect drain pump for debris or wear
- Check water level sensor and pressure tube for proper function and connections
Parts needed: Drain pump, Filter assembly, Water level sensor/pressure switch
- If clearing hoses and filters doesn’t resolve issue
- If water leaks during tests
- If drain pump does not activate with power
Next step
Choose the next step for E3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | BDWLA001 |
| voltage_rating | 120V AC |
Common Questions
What does E3 error mean on blackdecker washing machine?
E3 indicates a drainage issue, causing the machine to stop mid-cycle or not drain water.
Can I fix blackdecker washing machine E3 error myself?
Yes, you can check for blockages in the drain hose and clean the pump filter.
How much does it cost to fix E3 error?
Repair costs range from $80 to $250 for parts and labor.
When should I call a technician for E3?
Call a technician if basic troubleshooting does not resolve the issue or if there are leaks.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!