Black & Decker Washing Machine Error E2
⚡ Quick Answer: The Black+Decker washing machine E2 error code indicates a drainage issue, often characterized by water remaining in the drum after a cycle and a humm... ✅ DIY Fixable
What Does Error E2 Mean?
The Black+Decker washing machine E2 error code indicates a drainage issue, often characterized by water remaining in the drum after a cycle and a humming sound. This error typically occurs during the drain phase and suggests that the washer is unable to properly drain water due to a clogged or kinked drain hose, an obstructed drain pump, or a faulty water level sensor.
Common Symptoms:
- Washer displays E2 and stops mid‑cycle
- Water remains in drum after cycle
- Error appears during drain phase
Possible Causes
- Clogged or kinked drain hose (medium)
- Obstructed drain pump or filter (medium)
- Faulty drain pump or water level sensor (low)
How to Fix Error E2
DIY Fix Check drain hose and pump filter
- Unplug washer from power
- Locate drain hose at rear and inspect for kinks or blockages
- Disconnect and flush hose if clogged
- Access drain pump filter (if accessible) and remove debris
DIY Fix Test run after clearing blockages
- Reassemble cleaned hoses and filter
- Plug washer back in
- Run a short rinse/spin cycle to confirm E2 is cleared
Technician Only Inspect/replace drain pump or water level sensor
- Diagnose drain pump electrical function and impeller movement
- Test water level sensor with multimeter
- Replace defective components as needed
Parts needed: drain pump, water level sensor
- Error persists after clearing hose and filter
- Water leaks or electrical issues are present
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on blackdecker washing machine?
E2 indicates a drainage problem, with water not draining properly and often a humming sound.
Can I fix blackdecker washing machine E2 error myself?
Yes, you can check the drain hose and pump filter for blockages and clear them.
How much does it cost to fix E2 error?
The estimated repair cost for E2 error is between $50 and $150 for parts.
When should I call a technician for E2?
Call a technician if the error persists after clearing blockages or if there are water leaks or electrical issues.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!