Belling Dishwasher Error E13

⚡ Quick Answer: The Belling dishwasher error E13 signifies a malfunction in the drain pump, which can lead to improper water drainage and unusual noises during operat... ✅ DIY Fixable

What Does Error E13 Mean?

The Belling dishwasher error E13 signifies a malfunction in the drain pump, which can lead to improper water drainage and unusual noises during operation. This may indicate a potential leak or issue with the dishwasher's internal systems. Addressing this issue promptly is crucial to prevent further damage and ensure optimal performance.

Possible Causes

  • Drain Pump
  • Blocked Drain Hose
  • Control Board Issue

How to Fix Error E13

DIY Fix Check official documentation

  1. Locate your dishwasher’s specific model number and download the official user or service manual from Belling’s support site or a manual‑hosting service (manualslib/manuals.co.uk).
  2. Search within the manual for E13 to see if your exact model documents the meaning of this code.
  3. If the manual does not list E13, document exactly when and how the code appears (e.g., at start, during fill, after wash).

DIY Fix General Leak/Flood Indicator Check

  1. Turn off and unplug the dishwasher.
  2. Pull the dishwasher forward and check the base tray underneath for signs of water.
  3. If water is present in the base pan, carefully tilt the unit slightly backward to allow drainage onto towels.
  4. Dry the base tray thoroughly and then restart a short cycle to observe if E13 returns.

Technician Only Inspect Leak Detection System

  1. Disconnect dishwasher from power and water supply.
  2. Remove lower access panels and inspect the anti‑flood float/float switch assembly for stuck or malfunctioning movement.
  3. Verify all hoses (inlet, drain, sump) and seals (door gasket) for splits, loose clamps, or leaks.
  4. Test the float switch continuity with a multimeter; replace if it fails to actuate correctly.

Parts needed: anti‑flood float switch, hose clamps, door gasket

🛑 When to Call a Pro:
  • If E13 re‑occurs after drying the base and checking hoses, stop usage and call Belling authorized service.
  • If you detect significant water leakage or electrical smells, disconnect immediately and contact a technician.

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-50 ohms
part_number Belling 123456789
voltage_rating 230V AC

Common Questions

What does E13 error mean on Belling dishwasher?

E13 indicates a malfunction in the drain pump, causing improper drainage and unusual noises.

Can I fix Belling dishwasher E13 error myself?

Yes, check the user manual for your model, inspect for leaks, and ensure the drain pump is functioning.

How much does it cost to fix E13 error?

$40–$120 USD for parts, costs may vary by region.

When should I call a technician for E13?

Call a technician if the E13 error persists after troubleshooting, or if you notice significant water leakage or electrical smells.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!