Belling Dishwasher Error E2
⚡ Quick Answer: The Belling dishwasher E2 error code signifies a drainage failure, indicating that the unit is unable to drain water effectively during or after a was... ✅ DIY Fixable
What Does Error E2 Mean?
The Belling dishwasher E2 error code signifies a drainage failure, indicating that the unit is unable to drain water effectively during or after a wash cycle. This issue may result in standing water at the bottom of the dishwasher, the appliance stopping mid-cycle, or water not evacuating through the drain hose. Common causes include a blocked or kinked drain hose, a clogged drain filter, or a malfunctioning drain pump.
Common Symptoms:
- Standing water in the dishwasher at the end of a cycle
- Dishwasher stops mid‑cycle with E2 displayed
- Water not evacuating through the drain hose
Possible Causes
- Blocked or kinked drain hose (medium)
- Clogged drain filter (medium)
- Faulty drain pump (medium)
How to Fix Error E2
DIY Fix Check and clear drain filter and hose
- Turn off and unplug the dishwasher.
- Remove the lower rack to access the drain area.
- Remove and clean the drain filter under running water.
- Inspect the drain hose at the back for kinks or debris.
- Straighten any kinks and clear blockages if present.
- Restore power and run a short cycle to test.
Technician Only Test and replace drain pump if needed
- Disconnect power and water supply.
- Remove dishwasher access panel to locate the drain pump.
- Inspect pump impeller for debris and test electrical continuity.
- Replace the drain pump if defective.
Parts needed: Drain pump assembly, Drain hose (if damaged)
- If water remains and cleaning/hoses checks do not resolve the error
- If strange noises occur from the pump area
- If internal leakage or flooding is suspected
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E2 error mean on belling dishwasher?
E2 error indicates a drainage failure, usually due to blocked components or a faulty drain pump.
Can I fix belling dishwasher E2 error myself?
Yes, you can check and clear the drain filter and hose as a first step to resolve the E2 error.
How much does it cost to fix E2 error?
Repair costs for the E2 error typically range from $50 to $200, depending on parts and labor.
When should I call a technician for E2?
Call a technician if water remains after cleaning, if you hear strange noises, or if you suspect internal leaks.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!