Beko Dryer Error E10

⚡ Quick Answer: The Beko dryer error E10 indicates a communication fault between the user interface/control board and the main PCB, often resulting in the dryer not s... ✅ DIY Fixable

What Does Error E10 Mean?

The Beko dryer error E10 indicates a communication fault between the user interface/control board and the main PCB, often resulting in the dryer not starting or responding to commands. This issue may stem from loose or damaged wiring and connectors. Users may notice the E10 error displayed, and the dryer may not accept program selections or start properly. To address this, basic checks can be performed, including unplugging the dryer to reset the electronics and inspecting for any visible damage or moisture in the control panel area.

Common Symptoms:

  • Dryer shows E10 on display
  • Dryer may not respond to program selection
  • Dryer may not start or accept commands

Possible Causes

  • Communication fault between user interface board and main PCB (medium)
  • Loose or damaged wiring / connector issues between control panel and main board (medium)

How to Fix Error E10

DIY Fix Basic checks and resets

  1. Unplug the dryer from mains power for at least 5 minutes to reset electronics
  2. Visually inspect the control panel area for signs of moisture or liquid spills
  3. Ensure buttons and program selector knob are not stuck or physically damaged

Technician Only Inspect and repair control communication components

  1. Disconnect mains power and remove dryer control panel
  2. Inspect ribbon cables and wiring harness between user interface board and main PCB; reseat connectors securely
  3. Check both boards for burn marks, corrosion, or cracked solder joints
  4. Test the user interface board and main PCB communication circuits with appropriate diagnostic tools
  5. Replace faulty user interface board or main PCB if confirmed defective

Parts needed: User interface/control board, Main PCB, Ribbon cables/connectors

🛑 When to Call a Pro:
  • If the dryer still displays E10 after resets and basic checks
  • If internal wiring or electronics show signs of damage or corrosion
  • If user is not comfortable opening the dryer housing

Technical Specifications

wattage 2800W
component Heating Element
resistance 10-30 ohms
part_number Beko 280000123
voltage_rating 240V AC

Common Questions

What does E10 error mean on beko dryer?

E10 error indicates a communication fault between the user interface and main PCB, preventing the dryer from starting.

Can I fix beko dryer E10 error myself?

Yes, you can attempt basic checks like unplugging the dryer, inspecting the control panel for moisture, and ensuring buttons are not stuck.

How much does it cost to fix E10 error?

The estimated repair cost for the E10 error ranges from $100 to $350, including parts and labor.

When should I call a technician for E10?

Call a technician if the E10 error persists after resets, if you notice damaged wiring, or if you're uncomfortable opening the dryer.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!