Beko Dryer Error E01

⚡ Quick Answer: The Beko dryer error E01 indicates a door lock or door-closed detection issue. This typically occurs when the dryer fails to start, often showing the ... ✅ DIY Fixable

What Does Error E01 Mean?

The Beko dryer error E01 indicates a door lock or door-closed detection issue. This typically occurs when the dryer fails to start, often showing the E01 code immediately after pressing Start/Pause. The problem may arise from the door not being fully closed, a defective door interlock or latch, or damaged wiring. To troubleshoot, ensure the door is securely closed and clear of obstructions, then try resetting the dryer.

Common Symptoms:

  • Dryer will not start
  • Display shows E01 immediately after pressing Start/Pause
  • Door symbol or error code appears indicating interlock issue

Possible Causes

  • Door not fully closed or blocked (medium)
  • Defective door interlock / latch or switch (medium)
  • Damaged door wiring harness or connector (low)

How to Fix Error E01

DIY Fix Check door closure and reset

  1. Ensure dryer door is fully closed and nothing (clothes, lint, debris) is blocking the latch.
  2. Open and firmly re‑close the door to ensure proper engagement.
  3. Unplug the dryer for 5–10 minutes to reset the control system, then plug back in and retry starting a cycle.

Technician Only Inspect and repair door interlock and wiring

  1. Disconnect power to the dryer.
  2. Remove dryer access panels to access the door latch/lock assembly.
  3. Test the door interlock switch for continuity with a multimeter when the door is closed.
  4. Inspect the door latch mechanism for wear or misalignment and replace if faulty.
  5. Check wiring harness and connectors between the door interlock and main control board for damage and repair/replace as needed.

Parts needed: door interlock switch, door latch assembly, wiring harness/connectors

🛑 When to Call a Pro:
  • If the dryer still displays E01 after checking/cleaning door closure and resets
  • If internal components (interlock switch or wiring) are suspected faulty

Technical Specifications

wattage 2500W
component Heating Element
resistance 10-30 ohms
part_number Beko 280000123
voltage_rating 240V AC

Common Questions

What does E01 error mean on Beko dryer?

E01 indicates a door lock issue, preventing the dryer from starting.

Can I fix Beko dryer E01 error myself?

Yes, check the door closure and reset the dryer by unplugging it.

How much does it cost to fix E01 error?

Estimated repair costs range from $40 to $150 for parts, plus labor.

When should I call a technician for E01?

Call a technician if E01 persists after checking the door or if internal components are suspected.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!