Beko Dryer Error 2

⚡ Quick Answer: The Beko dryer error code 2 indicates a malfunction in the motor drive unit, which may cause the drum to stop turning or the dryer to stop shortly aft... ✅ DIY Fixable

What Does Error 2 Mean?

The Beko dryer error code 2 indicates a malfunction in the motor drive unit, which may cause the drum to stop turning or the dryer to stop shortly after starting. This issue is often linked to motor start circuit faults or problems with the overflow switch, potentially leading to water leakage detection. If you encounter this error, check for proper load balancing and inspect for any signs of water around the dryer.

Common Symptoms:

  • Dryer stops shortly after starting and may not rotate drum (associated with E02 on some Beko models).
  • Possible water leakage detection / overflow-related issues (per community error list).

Possible Causes

  • Motor start / motor triac fault (associated with E02 on Beko dryers) (medium)
  • Overflow switch / water detection circuit error (community-sourced) (low)

How to Fix Error 2

DIY Fix Basic checks before calling service

  1. Unplug the dryer for 5 minutes and restart to see if error clears.
  2. Check around the dryer for signs of water leakage (in case overflow switch is triggered).
  3. Ensure the dryer load is balanced and not overloaded before retrying.

Technician Only Diagnose motor start circuitry and overflow switch

  1. Use diagnostic tools to confirm whether the motor start circuit or motor triac is faulty.
  2. Inspect and test the overflow switch / water detection circuit for correct operation.
  3. Verify wiring harness connections and control board signals related to motor and overflow circuits.

Parts needed: motor start circuit components, motor triac/triac board module, overflow switch/water sensor

🛑 When to Call a Pro:
  • If the dryer repeatedly stops soon after starting with error code appearing.
  • If there is visible water leakage or unexplained electrical smell or overheating.

Technical Specifications

wattage 2000W
component Motor Drive Unit
resistance 10-30 ohms
part_number Beko 280001234
voltage_rating 240V AC

Common Questions

What does 2 error mean on beko dryer?

Error 2 indicates a malfunction in the motor drive unit, causing the drum to stop turning.

Can I fix beko dryer 2 error myself?

Yes, you can try unplugging the dryer for 5 minutes and check for water leakage.

How much does it cost to fix 2 error?

Estimated repair costs range from ¥10,000 to ¥30,000 depending on parts and labor.

When should I call a technician for 2?

Call a technician if the error persists or if you notice water leakage or electrical smells.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!