Beko Dryer Error 16

⚡ Quick Answer: The Beko dryer error code 16 indicates a door lock release or detection error. This means the dryer cannot confirm if the door is securely locked, whi... ✅ DIY Fixable

What Does Error 16 Mean?

The Beko dryer error code 16 indicates a door lock release or detection error. This means the dryer cannot confirm if the door is securely locked, which may prevent the dryer from starting or cause it to stop shortly after beginning the drying cycle. Common causes include a malfunction in the door lock mechanism or the latch not engaging properly. Users should ensure the door is fully closed and free from obstructions to resolve the issue.

Common Symptoms:

  • Error code E16 displayed on the dryer panel
  • Dryer may not start or may stop shortly after starting due to door lock issues
  • Door may appear unlocked or not securely locked even when closed

Possible Causes

  • Door lock or latch mechanism not engaging or detected correctly (medium)

How to Fix Error 16

DIY Fix Check door closure and lock engagement

  1. Ensure the dryer door is fully closed and latched securely.
  2. Open the door and close it again firmly to make sure nothing is blocking the latch.
  3. Inspect the door seal area for obstructions (lint, clothing edges) that could prevent proper lock engagement.
  4. Restart the dryer after ensuring a secure door lock.

Technician Only Inspect and service the door lock mechanism

  1. Disconnect power to the dryer before servicing.
  2. Check the door lock assembly for physical damage or wear.
  3. Verify the lock sensor/wiring continuity with a multimeter.
  4. Replace the door lock/latch assembly if defective and reassemble.
  5. Test the dryer for correct lock detection before returning to use.

Parts needed: Door lock/latch assembly, Associated wiring/connectors

🛑 When to Call a Pro:
  • If the door lock mechanism appears physically damaged
  • If the error persists after checking and reseating the door latch
  • If you are unsure how to safely test electrical components

Technical Specifications

wattage 2800W
component Heating Element
resistance 10-30 ohms
part_number Beko 280000001
voltage_rating 240V AC

Common Questions

What does 16 error mean on Beko dryer?

Error 16 means the dryer has detected a door lock release/detection issue, preventing operation.

Can I fix Beko dryer 16 error myself?

Yes, check that the door is fully closed and that the latch is engaging properly.

How much does it cost to fix 16 error?

Repair costs are moderate, including the door lock part and labor.

When should I call a technician for 16?

Call a technician if the door lock appears damaged or the error persists after reseating the latch.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!