Beko Dryer Error 13

⚡ Quick Answer: The Beko dryer error code 13 indicates a water tank full detection fault, suggesting that the dryer mistakenly believes the condensate tank is full. T... ✅ DIY Fixable

What Does Error 13 Mean?

The Beko dryer error code 13 indicates a water tank full detection fault, suggesting that the dryer mistakenly believes the condensate tank is full. This can lead to the drying cycle stopping prematurely or the water tank icon flashing on the display. Causes may include a malfunctioning float or level sensor, or debris obstructing the sensor's operation. To resolve this, check and empty the condensate tank, ensuring it's clean and free from blockage.

Common Symptoms:

  • Dryer displays E13 and may flash the water tank icon
  • Drying cycle may stop early
  • Dryer may incorrectly indicate the water tank is full even when it’s not

Possible Causes

  • Water tank full detection triggered (float/level sensor) (medium)
  • Obstruction or debris in float chamber or level sensor (medium)

How to Fix Error 13

DIY Fix Check and empty condensate tank

  1. Turn off and unplug the dryer.
  2. Remove the condensate (water) tank.
  3. Empty the tank fully and clean any visible debris.
  4. Reinsert the tank firmly until it locks in place.
  5. Restart the dryer and see if the error clears.

Technician Only Inspect/clean/replace water level detection components

  1. Disconnect power and remove lower front access panel.
  2. Inspect the float chamber for blockages (lint, sludge) and clean thoroughly.
  3. Test the float switch/level sensor with a multimeter for proper open/close operation.
  4. Check wiring harness and connectors from the level sensor to the control board for damage or poor connection.
  5. Replace the water level float switch or related sensor if defective.
  6. Reassemble and verify proper operation.

Parts needed: Water level float switch, Wiring harness/connectors, Condensate tank components

🛑 When to Call a Pro:
  • If error persists after emptying and cleaning the condensate tank and you are not comfortable testing internal sensors or wiring.
  • If there is evidence of electrical damage, water ingress in electrical areas, or recurring false triggers despite sensor replacement.

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number Beko 280000123
voltage_rating 240V AC

Common Questions

What does 13 error mean on beko dryer?

Error 13 means the dryer detects the condensate tank as full, halting the drying cycle.

Can I fix beko dryer 13 error myself?

Yes, check and empty the condensate tank, and clean any debris to resolve the issue.

How much does it cost to fix 13 error?

Repair costs range from $20 to $120 for parts, plus labor.

When should I call a technician for 13?

Call a technician if the error persists after cleaning or if there are electrical issues.

Data last verified: 2026-01-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!