Baumatic Dishwasher Error E6

⚡ Quick Answer: The Baumatic Dishwasher E6 error indicates a potential malfunction in the drain pump, often marked by unusual noises and failure to drain water. It ma... ✅ DIY Fixable

What Does Error E6 Mean?

The Baumatic Dishwasher E6 error indicates a potential malfunction in the drain pump, often marked by unusual noises and failure to drain water. It may also relate to a thermistor fault, which can disrupt the cycle. If the E6 error appears, the dishwasher may stop mid-cycle, suggesting an issue that needs attention.

Common Symptoms:

  • Dishwasher displays E6 and may stop mid‑cycle (specific symptom detail not available in official sources)

Possible Causes

  • Thermistor fault (open circuit) (low)

How to Fix Error E6

DIY Fix Basic checks and reset

  1. Turn off and disconnect the dishwasher from the mains power.
  2. Wait for a few minutes to let the machine reset, then reconnect and restart.
  3. Ensure that the water supply is properly connected and the door is fully closed.

Technician Only Inspect and potentially replace the thermistor

  1. Access the internal components per the service manual (technician level).
  2. Test the thermistor for open circuit or fault using proper tools.
  3. Replace the thermistor if found defective.

Parts needed: Thermistor

🛑 When to Call a Pro:
  • If the error persists after basic checks and reset, stop attempts to run the dishwasher and contact Baumatic service or a qualified appliance technician for diagnosis.

Technical Specifications

wattage 30W
component Drain Pump
resistance 5-15 ohms
part_number BAU-DRN-PMP-001
voltage_rating 230V AC

Common Questions

What does E6 error mean on Baumatic Dishwasher?

E6 indicates a malfunction in the drain pump and may be related to a thermistor fault.

Can I fix Baumatic Dishwasher E6 error myself?

Yes, try resetting the dishwasher and checking connections, but further issues may need professional help.

How much does it cost to fix E6 error?

Repair costs vary by model and region; consult a technician for an estimate.

When should I call a technician for E6?

If the error persists after basic checks and reset, contact Baumatic service or a qualified technician.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!