Baumatic Dishwasher Error E2

⚡ Quick Answer: The Baumatic Dishwasher E2 error code indicates a drainage issue, typically preventing the dishwasher from removing water as expected. This may cause ... ✅ DIY Fixable

What Does Error E2 Mean?

The Baumatic Dishwasher E2 error code indicates a drainage issue, typically preventing the dishwasher from removing water as expected. This may cause the appliance to stop mid-cycle, leaving standing water in the base. A humming sound may be heard if the drain pump is malfunctioning or jammed. Common causes include a clogged drain filter or hose, which should be checked and cleared to resolve the issue.

Common Symptoms:

  • Dishwasher stops mid-cycle and displays E2 often after attempting to drain.
  • Standing water remains in the base after cycle.
  • Drain pump hums faintly or does not run when draining should occur.

Possible Causes

  • Clogged or blocked drain system (filter, drain hose, sink connection) (high)
  • Faulty or jammed drain pump (medium)

How to Fix Error E2

DIY Fix Check and clear drain filter and hoses

  1. Turn off and unplug the dishwasher.
  2. Remove the lower dish rack and locate the drain filter at the bottom of the tub.
  3. Remove and rinse the filter under running water, removing any debris.
  4. Inspect the drain hose behind the dishwasher for kinks or blockages; straighten any kinks.
  5. Check the sink drain or trap where the dishwasher hose connects for clogs.

Technician Only Inspect and potentially replace the drain pump

  1. Disconnect power and water supply.
  2. Access the drain pump via the lower access panel or by pulling out the dishwasher.
  3. Check the pump impeller for obstructions and remove any debris found.
  4. Test the pump for electrical continuity and operation during a drain cycle.
  5. Replace the drain pump if it fails to run or shows internal damage.

Parts needed: Drain pump assembly, Gaskets or clamps for hose connections

🛑 When to Call a Pro:
  • If you have cleared filters and hoses yet the dishwasher still won’t drain and the error persists.
  • If you suspect a faulty pump or internal wiring issue.
  • If you are uncomfortable performing electrical or internal mechanical checks.

Technical Specifications

wattage 50W
component Drain Pump
resistance 30-60 ohms
part_number Baumatic BP1234
voltage_rating 230V AC

Common Questions

What does E2 error mean on Baumatic Dishwasher?

E2 error means there is a drainage issue, preventing water removal during the cycle.

Can I fix Baumatic Dishwasher E2 error myself?

Yes, you can check and clear the drain filter and hoses to resolve the issue.

How much does it cost to fix E2 error?

Repair costs range from $80 to $250 for parts and labor, depending on the model and region.

When should I call a technician for E2?

Call a technician if the error persists after clearing filters or if you suspect a faulty pump.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!