Bauknecht Refrigerator Error E10
⚡ Quick Answer: The Bauknecht refrigerator error E10 signifies a malfunction related to the temperature sensor or water drainage system. This error may cause erratic ... ✅ DIY Fixable
What Does Error E10 Mean?
The Bauknecht refrigerator error E10 signifies a malfunction related to the temperature sensor or water drainage system. This error may cause erratic cooling and temperature fluctuations, often accompanied by water accumulation in the base pan. Continuous operation of the internal condensate or drain pump may also occur. Addressing this issue promptly is essential to avoid further damage to your appliance.
Common Symptoms:
- Error E10 displayed on control panel
- Potential internal water accumulation in base pan
- Internal condensate or drain pump may run continuously
- Refrigerator may alarm or shut down
Possible Causes
- Internal drain pan overflow or leak detection triggered (low)
- Clogged internal drain hose or condensate drain path (low)
- Failed drain pump (if equipped) (low)
How to Fix Error E10
DIY Fix Check for water accumulation and basic drain blockages
- Unplug the refrigerator from power.
- Inspect the area beneath the refrigerator for signs of water.
- Carefully remove the front kick plate or rear lower access panel if easily accessible.
- Look for standing water in the base pan; dry any visible water with towels.
- Check accessible drain hose for obvious kinks or obstructions.
Technician Only Service drain path and components
- Disconnect power and close water supply (if model has water line).
- Remove panels to access internal drain hose and condensate pump (if present).
- Clear blockages in drain hose and evaporator drain channel.
- Test the drain pump for operation; replace if non‑functional.
- Verify all water inlet tubing and connections for leaks.
Parts needed: Drain hose, Condensate drain pump (if equipped), Seals and water tubing
- If water leaks continue after basic drainage checks.
- If E10 persists after attempted drain clearing and pump tests.
- If you are not comfortable accessing internal components safely.
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Refrigerator Drain Pan
Collects defrost water beneath the appliance so it can evaporate safely.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kOhms at 25°C |
| part_number | Bauknecht 481227128069 |
| voltage_rating | 230V AC |
Common Questions
What does E10 error mean on Bauknecht refrigerator?
E10 indicates a malfunction in the temperature sensor or water drainage system, leading to inconsistent cooling and potential water accumulation.
Can I fix Bauknecht refrigerator E10 error myself?
Yes, you can check for water accumulation and clear basic drain blockages by inspecting the area under the refrigerator.
How much does it cost to fix E10 error?
Repair costs for the E10 error typically range from ¥5,000 to ¥25,000+, depending on parts and labor.
When should I call a technician for E10?
Call a technician if water leaks persist after basic checks or if the E10 error remains after clearing drains and testing pumps.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!