Bauknecht Refrigerator Error E01
⚡ Quick Answer: The Bauknecht refrigerator error code E01 indicates a malfunction in the temperature sensor, which can lead to incorrect temperature readings and over... ✅ DIY Fixable
What Does Error E01 Mean?
The Bauknecht refrigerator error code E01 indicates a malfunction in the temperature sensor, which can lead to incorrect temperature readings and overall cooling issues. If this error appears, the refrigerator may not be functioning properly, posing a risk to food preservation.
Common Symptoms:
- Error code display on control panel
- Refrigerator not functioning normally (e.g., temperature control issues)
Possible Causes
- Unknown/unverified specific cause for E01 on Bauknecht refrigerators (low)
How to Fix Error E01
DIY Fix Basic user checks and power cycle
- Unplug the refrigerator from power for several minutes to perform a hard reset.
- Check the refrigerator’s doors are fully closed and seals intact.
- Observe whether the error code clears on restart.
Technician Only Professional inspection for electronics and sensors
- Use service manuals specific to the exact Bauknecht model to interpret error codes.
- Inspect control board and associated electronics for faults.
- Examine temperature sensors and wiring harness for continuity and damage.
Parts needed: Control board (if confirmed faulty), Temperature sensors (thermistors), Wiring harness
- If the error persists after basic reset attempts.
- If there are signs of electrical/component malfunction (burnt smell, no cooling).
- If internal temperature is not maintained and food is at risk.
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 5-10 kΩ |
| part_number | Bauknecht 481227128157 |
| voltage_rating | 220V AC |
Common Questions
What does E01 error mean on Bauknecht refrigerator?
E01 indicates a malfunction in the temperature sensor, leading to incorrect temperature readings.
Can I fix Bauknecht refrigerator E01 error myself?
Yes, you can try basic checks like power cycling the fridge and ensuring doors are sealed properly.
How much does it cost to fix E01 error?
Repair costs vary based on the model and parts needed; a technician's quote is required.
When should I call a technician for E01?
Call a technician if the error persists after resets or if there are signs of electrical malfunction.
Sources & References
- Lista över felkoder för Bauknecht kyl och frys (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!