Asko Dryer Error F18
⚡ Quick Answer: The F18 error code on an Asko dryer typically indicates an issue with the heating element, leading to a lack of heat during drying cycles. While this ... ✅ DIY Fixable
What Does Error F18 Mean?
The F18 error code on an Asko dryer typically indicates an issue with the heating element, leading to a lack of heat during drying cycles. While this code is not officially documented for Asko dryers, users have reported it as a possible malfunction. If your dryer is displaying this code, it may be a sign of a significant issue that requires attention. It's advisable to confirm the error code and model specifics, restart the machine, and monitor for its recurrence.
Possible Causes
- Heating Element
- Thermal Fuse
- Wiring Issues
How to Fix Error F18
DIY Fix Verify error code display and model specifics
- Ensure the code F18 is displayed exactly as shown on the dryer panel (confirm no other letters or lights associated).
- Check the exact dryer model number; some models may use different error signaling systems.
- Restart the dryer by turning it off and unplugging for a few minutes, then power on again to see if the code reappears.
Technician Only Contact official Asko support or authorized technician
- Provide the exact dryer model and the F18 error code to Asko support or service technician.
- Have the technician consult the specific service manual for that model to interpret F18.
- Technician should perform diagnostics with appropriate tools if the code persists.
- If the F18 error persists after reset attempts.
- If unusual noises, smoke, or burning odors accompany the error.
- If the dryer fails to start or operate normally after basic checks.
Next step
Choose the next step for F18
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermal Fuse
A safety device that cuts off power to the appliance if it starts to overheat.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | ASKO 8052030 |
| voltage_rating | 240V AC |
Common Questions
What does F18 error mean on asko dryer?
The F18 error may indicate a malfunctioning heating element, causing the dryer not to produce heat.
Can I fix asko dryer F18 error myself?
Yes, you can try resetting the dryer and confirming the error code before seeking professional help.
How much does it cost to fix F18 error?
Repair costs for the F18 error can vary widely based on model and region, so it's best to consult a technician.
When should I call a technician for F18?
Call a technician if the error persists after resets or if there are unusual noises or odors.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!