Asko Dryer Error F3
⚡ Quick Answer: The Asko dryer error F3 indicates a malfunction in the temperature sensor, commonly known as the thermistor. This can lead to improper heating, errati... ⚠️ Difficulty Varies
What Does Error F3 Mean?
The Asko dryer error F3 indicates a malfunction in the temperature sensor, commonly known as the thermistor. This can lead to improper heating, erratic temperature readings, and may cause the dryer to stop mid-cycle or run indefinitely. The issue is typically due to a thermistor failure or damaged wiring between the thermistor and the control board. Regular maintenance and checks are essential to prevent airflow issues that could exacerbate the problem.
Common Symptoms:
- Dryer may fail to reach correct drying temperature
- Cycle stops mid‑cycle or runs indefinitely
- Inconsistent heat behavior during operation
Possible Causes
- Thermistor (temperature sensor) failure (medium)
- Damaged or loose wiring between thermistor and control board (medium)
How to Fix Error F3
DIY Fix Basic checks before calling technician
- Unplug the dryer and allow it to cool completely.
- Ensure the dryer vent path and lint filters are clean (not directly fixing thermistor but eliminates airflow causes).
- Power the dryer back on and see if the error persists.
Technician Only Inspect and replace thermistor and wiring
- Disconnect power and access the internal control/temperature sensor area.
- Test the thermistor for continuity/resistance according to model specifications.
- Inspect wiring harness to thermistor for breaks, heat damage, or loose connectors.
- Replace the thermistor and any damaged wiring as needed.
- Reassemble and test dryer operation to confirm resolution.
Parts needed: Thermistor (temperature sensor), Thermistor wiring harness/connectors
- If the error persists after basic user checks
- When replacing internal components beyond simple external checks
Next step
Choose the next step for F3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10-20 ohms |
| part_number | ASKO 8070432 |
| voltage_rating | 240V AC |
Common Questions
What does F3 error mean on asko dryer?
The F3 error indicates a malfunction of the temperature sensor, affecting drying efficiency.
Can I fix asko dryer F3 error myself?
Yes, start by unplugging the dryer and checking for airflow issues; however, the thermistor may need professional replacement.
How much does it cost to fix F3 error?
The repair cost includes the technician service fee and parts, which can vary by region and model.
When should I call a technician for F3?
Call a technician if the error persists after basic checks or if internal components need replacement.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!