Asko Dryer Error F13
⚡ Quick Answer: The Asko dryer error code F13 indicates a potential malfunction in the heating element, which may lead to the dryer failing to produce heat during ope... ✅ DIY Fixable
What Does Error F13 Mean?
The Asko dryer error code F13 indicates a potential malfunction in the heating element, which may lead to the dryer failing to produce heat during operation. If you encounter this error, it is essential to verify that the error code applies to the dryer model you are using. In some cases, resetting the machine by unplugging it for 5–10 minutes may resolve the issue. Always refer to your user manual for specific fault code references related to your model.
Possible Causes
- Heating Element
How to Fix Error F13
DIY Fix Verify error applicability and basic checks
- Confirm that the machine showing F13 is indeed an Asko **dryer** (and not another appliance like a dishwasher).
- Turn the dryer off, unplug it from power for 5–10 minutes, then plug it back in and attempt to restart.
- Check user manual for your specific dryer model to see if F13 is referenced under fault codes.
- Inspect and clean lint filter, venting, and condensate system (if applicable) to ensure proper airflow.
- If the F13 code persists after basic checks and power reset.
- If the dryer exhibits additional faults (no heat, unusual noises, or inability to complete cycles).
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | ASKO 8051600 |
| voltage_rating | 240V AC |
Common Questions
What does F13 error mean on asko dryer?
The F13 error indicates a malfunction in the heating element, causing the dryer to fail to produce heat.
Can I fix asko dryer F13 error myself?
Yes, you can try resetting the dryer by unplugging it for 5–10 minutes and checking the user manual for specific fault codes.
How much does it cost to fix F13 error?
Repair costs vary by model and region; it's best to consult with a technician for an accurate estimate.
When should I call a technician for F13?
Call a technician if the F13 code persists after a reset or if the dryer shows additional faults like no heat or unusual noises.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!