Asko Dryer Error F10
⚡ Quick Answer: The F10 error code on Asko dryers typically indicates a malfunction related to the heating element, which can lead to unexpected shutdowns during dryi... ✅ DIY Fixable
What Does Error F10 Mean?
The F10 error code on Asko dryers typically indicates a malfunction related to the heating element, which can lead to unexpected shutdowns during drying cycles. Symptoms may include the dryer failing to complete drying or air-dry cycles, and potential water accumulation around the pump or filter area. Basic troubleshooting steps include resetting the dryer, cleaning the lint filter, and checking for clogs around the pump and filters.
Common Symptoms:
- Dryer shuts off unexpectedly during cycle
- Dryer may fail to complete drying or air-dry cycles
- Possible presence of water accumulation near pump/filter (based on community report)
Possible Causes
- Unverified sensor or component issue (low)
- Potential drain pump/filter obstruction (low)
How to Fix Error F10
DIY Fix Basic checks and reset
- Unplug the dryer from power and wait a few minutes before restoring power to reset any temporary fault states.
- Clean the lint filter, condenser area, and venting to ensure good airflow.
- Check around accessible filters/pumps for signs of water or lint buildup.
Technician Only Component inspection and testing
- Access and inspect the thermistor/temperature sensors for proper function and wiring integrity.
- Inspect the drain pump and filter area for obstructions and signs of water accumulation.
- Test heating elements and related circuitry if applicable.
Parts needed: Thermistor/temperature sensor, Drain pump and associated filters, Wiring harness
- If the dryer continues to show F10 after basic cleaning and reset
- If water is visibly accumulating inside the dryer
- If internal components test faulty during diagnostics
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 5000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | ASKO 8051318 |
| voltage_rating | 240V AC |
Common Questions
What does F10 error mean on asko dryer?
The F10 error indicates a malfunction related to the heating element, causing the dryer to shut off unexpectedly.
Can I fix asko dryer F10 error myself?
Yes, you can try basic checks like resetting the dryer and cleaning the lint filter and pump area.
How much does it cost to fix F10 error?
Repair costs typically range from $100 to $300 depending on parts and labor.
When should I call a technician for F10?
Call a technician if the error persists after cleaning, if water accumulates inside the dryer, or if internal components are faulty.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!