Asko Dishwasher Error F9
⚡ Quick Answer: The F9 error code on your Asko dishwasher indicates a circulation fault or pressure irregularity within the water circulation system. This can lead to... ✅ DIY Fixable
What Does Error F9 Mean?
The F9 error code on your Asko dishwasher indicates a circulation fault or pressure irregularity within the water circulation system. This can lead to the dishwasher stopping mid-cycle, with a potential lack of proper water circulation. The error may occur after the fill stage or during the wash cycle when the pump should be actively functioning. Unusual sounds during operation may also accompany this issue, often related to the drain pump's malfunction.
Common Symptoms:
- Dishwasher stops mid‑cycle with F9 displayed
- Possible lack of proper water circulation
- Error may appear after fill or mid‑wash when pump should be running
Possible Causes
- Circulation fault detected by pressure sensor (medium)
How to Fix Error F9
DIY Fix Basic checks and cleaning
- Turn off and unplug the dishwasher.
- Clean filters and sump area to remove debris that might block water flow.
- Ensure spray arms and circulation areas are not obstructed.
- Check that the water supply to the dishwasher is steady and hoses are not kinked.
Technician Only Inspect circulation pump and pressure components
- Verify proper operation of the circulation pump and remove any blockages.
- Check the pressure sensor and pressure chamber for damage or leaks.
- Test wiring and connections between pressure sensor and control board.
Parts needed: Circulation pump, Pressure sensor, Pressure chamber
- If error persists after basic cleaning and water supply checks
- If components like pump or sensors appear faulty or you lack tools/experience
Next step
Choose the next step for F9
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | ASKO 8050373 |
| voltage_rating | 120V AC |
Common Questions
What does F9 error mean on asko dishwasher?
The F9 error indicates a circulation fault, causing your dishwasher to stop mid-cycle due to improper water circulation.
Can I fix asko dishwasher F9 error myself?
Yes, you can try basic checks like cleaning filters and ensuring no obstructions in the spray arms.
How much does it cost to fix F9 error?
The estimated repair cost ranges from $150 to $400+, depending on the specific parts and labor required.
When should I call a technician for F9?
Call a technician if the error persists after basic cleaning or if you find faulty components you can't replace.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!