Asko Dishwasher Error F2
⚡ Quick Answer: The Asko dishwasher F2 error indicates a water management fault, likely due to an issue with the drain pump or incorrect water level detection. Sympto... ✅ DIY Fixable
What Does Error F2 Mean?
The Asko dishwasher F2 error indicates a water management fault, likely due to an issue with the drain pump or incorrect water level detection. Symptoms include the error displaying during or after a cycle, water accumulation in the base pan triggering the float sensor, and either failure to fill or overfilling. Common causes are a clogged drain, malfunctioning pressure sensor, or water inlet problems. Addressing these issues promptly can restore normal operation.
Common Symptoms:
- Dishwasher displays F2 error during or after cycle
- Water accumulated in base pan activating float/flood sensor
- Dishwasher may not fill or may overfill
Possible Causes
- Base pan water triggering flood/anti‑flood float switch (medium)
- Pressure/level sensor or hose malfunction leading to incorrect water level detection (medium)
- Clogged drain or poor drainage causing high water level (medium)
- Water inlet issues causing improper filling (medium)
How to Fix Error F2
DIY Fix Check for water in base pan and dry
- Turn off and unplug the dishwasher.
- Remove lower kick plate/access panel.
- Check base pan under dishwasher for standing water.
- Use towels/sponges to absorb any water.
- Dry area and monitor if error clears on next run.
DIY Fix Inspect drain system for blockages
- Remove dishwasher lower filter and clean debris.
- Inspect drain hose for kinks or obstructions.
- Ensure drain pump is free of debris and spins freely.
Technician Only Test and service pressure/level sensor and hose
- Disconnect dishwasher from mains.
- Locate pressure switch and connecting hose.
- Inspect hose for cracks, clogs, or disconnections.
- Test pressure switch operation and replace if faulty.
Parts needed: Pressure/level sensor, Pressure hose
Technician Only Inspect and service water inlet and drain components
- Check water inlet valve and filters for blockages or failure.
- Test inlet valve operation under power.
- Replace faulty inlet valve if stuck or non‑responsive.
- Inspect and replace drain pump if defective.
Parts needed: Inlet valve, Drain pump
- Error persists after clearing water, cleaning drains, and checking inlet/pressure components
- Signs of leakage inside cabinet or base pan that cannot be traced
- Unusual noises or smell during operation
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | ASKO 8052111 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on asko dishwasher?
F2 indicates a malfunction related to water management, often involving the drain pump or incorrect water levels.
Can I fix asko dishwasher F2 error myself?
Yes, you can check for water in the base pan, inspect the drain system for blockages, and clean the lower filter.
How much does it cost to fix F2 error?
The estimated repair cost for the F2 error ranges from $50 to $150, depending on parts and labor.
When should I call a technician for F2?
Call a technician if the error persists after cleaning or if you notice leaks or unusual noises during operation.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!