Asko Dishwasher Error F13

⚡ Quick Answer: The ASKO dishwasher error F13 indicates a malfunction in the drying fan or ventilation system. This error typically appears during or near the end of ... ✅ DIY Fixable

What Does Error F13 Mean?

The ASKO dishwasher error F13 indicates a malfunction in the drying fan or ventilation system. This error typically appears during or near the end of the cycle and is often accompanied by poor drying performance and unusual fan noises. Common causes include a failed drying fan motor, blocked vent passages, and wiring issues. Addressing these problems promptly can help restore normal operation.

Common Symptoms:

  • Dishwasher displays F13 during or near end of cycle
  • Drying performance poor or absent
  • Possible unusual fan noise

Possible Causes

  • Drying fan motor has failed (medium)
  • Blocked or obstructed vent/air passage (medium)
  • Wiring or connection issue to fan (medium)
  • Control board fan driver failure (low)

How to Fix Error F13

DIY Fix Check vent area and restart

  1. Turn off and unplug the dishwasher.
  2. Inspect the vent area in the door for debris or blockages.
  3. Clear any visible obstruction.
  4. Restore power and restart the dishwasher.

Technician Only Inspect/replace drying fan and wiring

  1. Disconnect electrical power at the breaker.
  2. Remove appropriate panels to access the drying fan assembly.
  3. Test the fan motor for continuity and proper rotation.
  4. Check wiring harness and connectors for damage or loose connections.
  5. Replace the drying fan motor if defective.
  6. If wiring and motor are good, test the control board fan driver output.

Parts needed: Drying fan motor, Fan housing/vent duct, Wiring harness

🛑 When to Call a Pro:
  • After basic vent inspection if F13 persists
  • If abnormal electrical issues or water exposure are suspected

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-20 ohms
part_number ASKO 8059002
voltage_rating 120V AC

Common Questions

What does F13 error mean on asko dishwasher?

The F13 error indicates a malfunction in the drying fan, resulting in poor drying performance and unusual noises.

Can I fix asko dishwasher F13 error myself?

Yes, you can check the vent area for blockages and restart the dishwasher.

How much does it cost to fix F13 error?

The estimated repair cost ranges from $100 to $350, depending on parts and labor.

When should I call a technician for F13?

Call a technician if the F13 error persists after checking the vent or if electrical issues are suspected.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!