Asko Dishwasher Error F10
⚡ Quick Answer: The Asko dishwasher error code F10 indicates a drainage failure or overflow condition. This error occurs when the water level inside the dishwasher ex... ✅ DIY Fixable
What Does Error F10 Mean?
The Asko dishwasher error code F10 indicates a drainage failure or overflow condition. This error occurs when the water level inside the dishwasher exceeds safe limits, prompting the machine's flood protection system to activate. Users may experience symptoms such as the dishwasher stopping mid-cycle, water remaining in the tub, and poor drainage. Common causes include a malfunctioning drain pump, blockages in the drain hose or filter, and excess water detection.
Common Symptoms:
- Dishwasher stops mid-cycle with F10 displayed
- Water remains in the tub after cycle
- Poor or no draining occurring
Possible Causes
- Excess water / overflow detection (medium)
- Drain blockages (hose or filter) (medium)
- Drain pump malfunction or obstruction (medium)
How to Fix Error F10
DIY Fix Basic Drainage Inspection
- Turn off and unplug the dishwasher.
- Inspect and clean the bottom filter area; remove debris.
- Check that the drain hose is not kinked or clogged.
DIY Fix Manual Drain and Reset
- Remove standing water using a sponge or small container.
- After clearing debris, plug the dishwasher back in and attempt a short cycle.
Technician Only Check Drain Pump and Internal Components
- Disconnect power and access the dishwasher’s sump area.
- Inspect and test the drain pump for proper operation; clear obstructions or replace if faulty.
- Verify the condition of the drain hose and connections.
Parts needed: Drain pump assembly, Drain hose, Filter components
- If water continues to not drain after cleaning filters and hoses
- If there are unusual noises from the pump area
- If there is visible water damage or leaks
Next step
Choose the next step for F10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | ASKO 8051212 |
| voltage_rating | 120V AC |
Common Questions
What does F10 error mean on asko dishwasher?
F10 error indicates a drainage failure or overflow condition, causing the dishwasher to stop mid-cycle.
Can I fix asko dishwasher F10 error myself?
Yes, you can inspect and clean the drain filters and hose, and manually drain standing water.
How much does it cost to fix F10 error?
Estimated repair costs range from $50 to $200, depending on parts and labor.
When should I call a technician for F10?
Call a technician if water does not drain after cleaning, or if you hear unusual noises from the pump.
Sources & References
- Asko Dishwasher F10 Code - Troubleshooting Guide (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!