Artusi Cooktop Error E5

⚡ Quick Answer: The Artusi cooktop E5 error indicates a malfunction in the temperature sensor, leading to erratic temperature readings or the cooktop zones shutting d... ✅ DIY Fixable

What Does Error E5 Mean?

The Artusi cooktop E5 error indicates a malfunction in the temperature sensor, leading to erratic temperature readings or the cooktop zones shutting down unexpectedly. This often occurs when the cooktop detects abnormal temperatures, prompting it to protect internal components by ceasing heating functions. Symptoms include sudden loss of heating and no response from the controls even after adjustments.

Common Symptoms:

  • Cooktop zone(s) suddenly stop heating when E5 appears
  • Error appears after a period of use or during heating
  • No further heating/function even when controls are changed

Possible Causes

  • Temperature sensor detecting over‑temperature or sensor fault on induction/ceramic cooktop (medium)

How to Fix Error E5

DIY Fix Basic checks & reset cooktop

  1. Turn off and unplug the cooktop from mains power.
  2. Wait at least 10 minutes to allow internal components to cool down.
  3. Remove any cookware and debris from the cooking zone(s).
  4. Plug in and power the cooktop again and attempt to use normally.

Technician Only Inspect and test temperature sensing components

  1. Disconnect power and remove cooktop from installation.
  2. Inspect internal **temperature sensors (including IGBT sensor)** and wiring harnesses for damage, disconnection, or corrosion.
  3. Use a multimeter to check resistance values of temperature sensors as per the cooktop’s circuit schematic.
  4. Replace any faulty sensors or related wiring; verify sensor readings return to expected ranges.
  5. Reassemble and test cooktop operation with load.

Parts needed: Temperature sensor(s), Sensor wiring harness, Control board interface connectors

🛑 When to Call a Pro:
  • Error persists after basic reset and cooling period
  • Error occurs again immediately on power‑up
  • Visible damage to internal wiring or sensor components

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10-20 ohms
part_number ARTUSI-TS-001
voltage_rating 240V AC

Common Questions

What does E5 error mean on Artusi cooktop?

The E5 error indicates a temperature sensor malfunction, causing erratic readings and heating failures.

Can I fix Artusi cooktop E5 error myself?

Yes, you can attempt basic troubleshooting steps such as resetting the cooktop and checking for debris.

How much does it cost to fix E5 error?

The estimated repair cost for the E5 error is medium, covering both parts and labor.

When should I call a technician for E5?

Call a technician if the error persists after a reset, occurs immediately upon power-up, or if you see visible damage to components.

Sources & References

Data last verified: 2026-04-14

User Comments (0)

Share your experience or solution below.

Be the first to comment!