Artusi Cooktop Error E2
⚡ Quick Answer: The Artusi cooktop E2 error indicates a malfunction in the temperature sensor, often triggered by overheating or abnormal temperature readings. This c... ✅ DIY Fixable
What Does Error E2 Mean?
The Artusi cooktop E2 error indicates a malfunction in the temperature sensor, often triggered by overheating or abnormal temperature readings. This can cause erratic display readings or lead to the cooktop zone disabling, preventing it from heating properly. To address this, turn off the cooktop and allow it to cool completely. Ensure that cookware is appropriate and centered on the zone, and check for any spills on the controls. After cooling, power the cooktop off and back on to see if the error code clears.
Common Symptoms:
- Display shows E2 and cooktop zone may disable
- Occurs during operation when unit overheats or detects abnormal temperature
- Zone may not heat and shuts off automatically
Possible Causes
- Temperature/thermal sensor fault or overheat protection engaged (medium)
How to Fix Error E2
DIY Fix Basic checks for temperature/sensor related E2
- Turn off the cooktop and let it cool completely before further use
- Ensure cookware is suitable and centered (for induction models) and no liquids are spilled on controls
- After cooling, power off and on to see if the code clears
Technician Only Inspect temperature sensors and internal connections
- Disconnect power to the cooktop
- Remove glass/ceramic surface to access temperature/thermal sensors
- Check sensor connections for loose wires, damage or incorrect readings with a multimeter
- Replace faulty temperature sensors or related harnesses if needed
Parts needed: temperature/thermal sensor(s), sensor wiring harness
- If the error persists after cooling and basic power cycle
- If you are not comfortable diagnosing sensor faults
Next step
Choose the next step for E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Cooktop parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 10-20 kOhms |
| part_number | ART-TS-001 |
| voltage_rating | 240V AC |
Common Questions
What does E2 error mean on Artusi cooktop?
E2 error indicates a temperature sensor malfunction, often due to overheating, causing erratic readings or zone shutdown.
Can I fix Artusi cooktop E2 error myself?
Yes, you can try cooling down the cooktop and ensuring proper cookware placement before restarting it.
How much does it cost to fix E2 error?
Repair costs range from $50 to $150 for parts, plus labor.
When should I call a technician for E2?
Call a technician if the error persists after cooling and basic troubleshooting, or if you're uncomfortable diagnosing the issue.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!