Amana Oven Error CAL

⚡ Quick Answer: The Amana oven error code CAL indicates that the oven has entered calibration mode, often resulting in erratic temperature readings and a lack of resp... ✅ DIY Fixable

What Does Error CAL Mean?

The Amana oven error code CAL indicates that the oven has entered calibration mode, often resulting in erratic temperature readings and a lack of response to normal cooking commands. This mode activates the oven's calibration function, which can sometimes be mistakenly triggered.

Common Symptoms:

  • Display shows "CAL" indicating calibration mode instead of a fault
  • Oven may not respond to normal cooking commands while in calibration mode

Possible Causes

  • Oven calibration function activated (high)

How to Fix Error CAL

DIY Fix Exit calibration mode and resume normal operation

  1. If the oven is currently displaying CAL, attempt to exit by pressing Cancel or a combination of buttons as indicated in your model’s manual.
  2. Refer to your Owner’s Manual calibration section for proper exit instructions.
  3. If unsuccessful, power-cycle the oven by turning off its circuit breaker or unplugging for 60 seconds then restoring power.

Technician Only Verify control board and calibration function

  1. Check that the oven’s calibration function is not stuck due to control board memory glitch.
  2. Use diagnostic mode (model-specific) to verify calibration setting and clear if incorrect.
  3. If the oven remains stuck in CAL mode post reset, test the electronic control board for faults and replace if needed.

Parts needed: Electronic control board / clock module

🛑 When to Call a Pro:
  • If the oven remains unresponsive after a proper reset procedure
  • If the display remains in CAL mode and normal functions cannot be restored

Next step

Choose the next step for CAL

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Non-Scratch Cooktop Cleaner

A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.

View maintenance supply
Diagnostic tool

Oven Thermometer

A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10K ohms at 25°C
part_number W10823610
voltage_rating 120V AC

Common Questions

What does CAL error mean on amana oven?

The CAL error means the oven is in calibration mode, affecting temperature readings and functionality.

Can I fix amana oven CAL error myself?

Yes, you can exit calibration mode by pressing Cancel or following your manual's instructions.

How much does it cost to fix CAL error?

Estimated repair costs for the CAL error range from $120 to $350.

When should I call a technician for CAL?

Call a technician if the oven remains in CAL mode after attempting a reset or if it is unresponsive.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318