AEG Refrigerator Error E13

⚡ Quick Answer: The E13 error code on AEG refrigerators suggests a possible malfunction related to the temperature sensor, which can lead to inconsistent cooling and ... ⚠️ Difficulty Varies

What Does Error E13 Mean?

The E13 error code on AEG refrigerators suggests a possible malfunction related to the temperature sensor, which can lead to inconsistent cooling and temperature fluctuations. This may affect the performance of your refrigerator, causing food spoilage or inadequate cooling. A power reset may temporarily resolve the issue, but if the error persists, further diagnosis may be necessary to identify the underlying problem.

Possible Causes

  • Temperature Sensor

How to Fix Error E13

DIY Fix Basic Checks and Power Reset

  1. Turn the refrigerator off and disconnect it from mains power.
  2. Wait 10–15 minutes.
  3. Reconnect power and observe whether the E13 code persists.
  4. Ensure the doors are fully closed and the appliance is level.
  5. Check for obvious issues such as loose front panel or display connections if accessible.
  6. Refer to your specific model’s user manual to confirm any documented error code meanings.

Technician Only Professional Diagnosis

  1. Inspect communication and ribbon cable connections between the display/control panel and main control board (common fault area for E13 on other fridge brands).
  2. Run a diagnostic check with manufacturer-specific service tool if available.
  3. Check for UI/display module faults or loose wiring.
  4. Verify sensor communications and control board function.

Parts needed: control panel/display PCB, ribbon cables, main control board

🛑 When to Call a Pro:
  • If the error code returns after power cycling.
  • If internal components must be accessed or disassembled.
  • If there are additional symptoms such as loss of cooling, unusual noises, or repeated faults.

Next step

Choose the next step for E13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms
part_number AEG 899645213000
voltage_rating 220-240V AC

Common Questions

What does E13 error mean on aeg refrigerator?

E13 indicates a possible temperature sensor malfunction, leading to cooling issues.

Can I fix aeg refrigerator E13 error myself?

Yes, try power cycling the fridge by disconnecting it for 10-15 minutes.

How much does it cost to fix E13 error?

Repair costs range from ¥10,000 to ¥40,000+, depending on the specific issue.

When should I call a technician for E13?

Call a technician if the error returns after power cycling or if there are additional symptoms.

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!