AEG Refrigerator Error E01

⚡ Quick Answer: The AEG refrigerator error E01 indicates a temperature sensor fault, which may lead to temperature control issues. This error is typically accompanied... ✅ DIY Fixable

What Does Error E01 Mean?

The AEG refrigerator error E01 indicates a temperature sensor fault, which may lead to temperature control issues. This error is typically accompanied by symptoms such as a warm interior and unusual humming sounds. If you see this error code, it is essential to check that the refrigerator doors are fully closed and that vents are unobstructed. A power reset by unplugging the refrigerator for 5-10 minutes may also help clear the error. Persistent issues may require professional inspection and sensor replacement.

Common Symptoms:

  • Error code E01 displayed on the fridge/freezer panel
  • Possible temperature control issues or sensor anomalies

Possible Causes

  • Temperature sensor fault or sensor warning (high)

How to Fix Error E01

DIY Fix Check basic conditions and restart

  1. Ensure the refrigerator doors are fully closed and not left ajar.
  2. Check that vents inside the unit are not blocked by food items.
  3. Unplug the refrigerator for 5–10 minutes and plug it back in to see if the error clears (power reset).

Technician Only Inspect and replace faulty sensor

  1. Locate the temperature sensors within the refrigerator and freezer compartments.
  2. Test the sensors with appropriate diagnostic tools for continuity and correct readings.
  3. Replace any sensors that are outside specification or malfunctioning.
  4. Verify correct operation after part replacement.

Parts needed: Temperature sensors (thermistors), Wiring harness related to sensors

🛑 When to Call a Pro:
  • If the error code persists after basic checks and power reset
  • If there are additional symptoms such as significant temperature rise, noises, or ice buildup

Next step

Choose the next step for E01

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 150W
component Compressor
resistance 5-10 ohms
part_number AEG 50272117000
voltage_rating 230V AC

Common Questions

What does E01 error mean on AEG refrigerator?

E01 indicates a temperature sensor fault that may cause temperature control issues.

Can I fix AEG refrigerator E01 error myself?

Yes, check door seals, clear vents, and perform a power reset to troubleshoot.

How much does it cost to fix E01 error?

Repair costs for E01 error range from ¥10,000 to ¥30,000, including parts and labor.

When should I call a technician for E01?

Call a technician if the error persists after basic checks or if you notice significant temperature changes or noise.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!