AEG Range Hood Error F

⚡ Quick Answer: The AEG range hood F error indicates a filter saturation reminder, signaling that the metal grease filter or other filters need cleaning. This may lea... ✅ DIY Fixable

What Does Error F Mean?

The AEG range hood F error indicates a filter saturation reminder, signaling that the metal grease filter or other filters need cleaning. This may lead to unusual sounds or a failure in fan operation. The error appears on the display after a specific operating time, prompting maintenance to ensure optimal performance.

Common Symptoms:

  • The letter F appears on the display or associated filter LED lights up
  • Appears after a set operating time to indicate filter saturation

Possible Causes

  • Saturated metal grease filter requiring cleaning (high)
  • Filter saturation reminder for other filters (depending on model) (medium)

How to Fix Error F

DIY Fix Clean or replace range hood filters

  1. Switch off and disconnect the cooker hood from power
  2. Remove the metal grease filter(s) and, if applicable, other filters like activated carbon
  3. Clean metal grease filters according to manual instructions (e.g., wash them thoroughly)
  4. Replace filters if they are beyond cleaning or if your model uses activated carbon that needs replacement
  5. Reinsert cleaned or replacement filters and restore power

DIY Fix Reset filter indicator

  1. After filters have been cleaned or replaced, perform the filter saturation reset as described in your user manual (typically holding the filter reset button on the control panel for several seconds)

Technician Only Inspect filter monitoring and sensors

  1. Check that the filter saturation monitoring system and relevant sensors are functioning correctly
  2. Verify wiring and control panel connections related to filter monitoring
  3. Replace any faulty sensors or control interface parts if diagnostics indicate failure

Parts needed: Filter saturation sensor, Control panel interface modules

🛑 When to Call a Pro:
  • If the F error persists after proper cleaning, reset, and inspection, book service with an authorized technician

Next step

Choose the next step for F

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Range Hood Grease Filter

Captures airborne grease before it reaches the range hood blower and ductwork.

Typical part-only price
$15 - $60
DIY difficulty
Easy
Estimated time
5 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Range Hood parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does F error mean on AEG range hood?

The F error indicates a filter saturation reminder, signaling that the grease filter needs cleaning.

Can I fix AEG range hood F error myself?

Yes, you can clean or replace the filters and reset the filter indicator according to the user manual.

How much does it cost to fix F error?

The estimated cost to fix the F error ranges from $50 to $150 for parts.

When should I call a technician for F?

Call a technician if the F error persists after cleaning and resetting the filters.

Sources & References

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!