AEG Induction Hob Error F1

⚡ Quick Answer: The AEG induction hob F1 error indicates a malfunction due to unsuitable cookware or an empty pot condition, particularly affecting models with the Se... ✅ DIY Fixable

What Does Error F1 Mean?

The AEG induction hob F1 error indicates a malfunction due to unsuitable cookware or an empty pot condition, particularly affecting models with the SenseBoil® function. This error typically arises when the hob detects inadequate power on the cooking zone, which may be signaled by unusual clicking sounds or a failure to heat. To resolve this issue, ensure your cookware is induction-compatible and correctly sized for the selected cooking zone.

Common Symptoms:

  • F1 appears on the display when attempting to use a cooking zone
  • SenseBoil® function does not activate or work correctly

Possible Causes

  • Unsuitable cookware material or cookware not detected (high)
  • Cookware size inappropriate for the selected cooking zone (medium)

How to Fix Error F1

DIY Fix Verify and correct cookware

  1. Ensure the pot/pan is induction-compatible by using a fridge magnet — it should stick to the base.
  2. Use enamelled steel or induction-rated cookware recommended by AEG.
  3. Make sure the cookware size matches the cooking zone being used.
  4. Place the cookware on the zone before turning the hob on.

DIY Fix Basic reset and dry surface

  1. Turn the hob off and wait for it to cool.
  2. Ensure the hob surface and pan base are dry and clean.
  3. Switch the hob off at the mains for ~30 seconds, then turn it back on.

Technician Only Service inspection if error persists

  1. Check internal detection sensors related to the induction coils for faults.
  2. Test electrical connections and power delivery to the hob.
  3. Verify correct installation and compliance with electrical specifications.

Parts needed: induction sensor module, control board connectors

🛑 When to Call a Pro:
  • Error persists after correct cookware and reset procedures
  • Error appears on multiple zones simultaneously
  • Physical damage or electrical issues (sparks, burning smell) are present

Next step

Choose the next step for F1

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

Typical part-only price
$20 - $120
DIY difficulty
Medium
Estimated time
30-90 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Induction Hob parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number AEG 949 595 031
voltage_rating 230V AC

Common Questions

What does F1 error mean on AEG induction hob?

F1 error indicates unsuitable cookware or an empty pot condition, affecting heating performance.

Can I fix AEG induction hob F1 error myself?

Yes, check that your cookware is induction-compatible and matches the cooking zone size, and perform a basic reset.

How much does it cost to fix F1 error?

Repair costs vary by region and labor rates; it's best to consult a local technician for an estimate.

When should I call a technician for F1?

Call a technician if the error persists after checking cookware and resetting, or if multiple zones show the error.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318