AEG Induction Hob Error F
⚡ Quick Answer: The AEG induction hob error F indicates that the induction coil has not detected suitable cookware on the active cooking zone. This can occur if there... ✅ DIY Fixable
What Does Error F Mean?
The AEG induction hob error F indicates that the induction coil has not detected suitable cookware on the active cooking zone. This can occur if there is no pan present, the cookware is not induction-compatible, or the cookware is improperly positioned. If the error persists after confirming proper cookware placement, it may suggest a connection fault within the appliance.
Common Symptoms:
- Error F appears when trying to activate a cooking zone
- Cooking zone deactivates with beep and F code
- Error persists even after placing cookware
Possible Causes
- No cookware detected on the active induction zone (high)
- Cookware unsuitable for induction (high)
- Persistent error due to connection or internal fault (medium)
How to Fix Error F
DIY Fix Check cookware compatibility and placement
- Ensure cookware is induction‑compatible (magnetic base).
- Test pan with a fridge magnet; it should stick to the base.
- Place the pan centrally on the cooking zone before switching it on.
- Ensure bottom of pan and cooktop surface are clean and dry.
DIY Fix Reset the induction hob
- Turn off the hob and isolate power at the mains.
- Wait ~30 seconds then restore power.
- Try selecting the zone and placing suitable cookware again.
Technician Only Inspect electrical connections and sensors
- Disconnect the hob from power.
- Open unit to inspect internal connections, sensors, and cookware detection coils.
- Test induction sensor circuits for continuity and proper operation.
- Replace or repair faulty sensor modules or wiring as needed.
Parts needed: induction coil/sensor, internal wiring harness, control board connectors
- If error F persists after checking cookware and resetting.
- If error appears with flashing pattern or additional codes (e.g., F3).
- If there are signs of electrical faults such as intermittent power or other errors.
Next step
Choose the next step for F
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Induction Heating Coil
Generates electromagnetic energy to heat pots and pans directly.
- Typical part-only price
- $80 - $180
- DIY difficulty
- Medium
- Estimated time
- 30-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Induction Hob parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Induction Coil |
| resistance | 10-30 ohms |
| part_number | AEG 949 597 019 00 |
| voltage_rating | 230V AC |
Common Questions
What does F error mean on AEG induction hob?
Error F means the hob has not detected suitable cookware, possibly due to absence or incompatibility.
Can I fix AEG induction hob F error myself?
Yes, check if your cookware is induction-compatible and properly placed. Reset the hob if needed.
How much does it cost to fix F error?
Repair costs typically range from $100 to $400, depending on parts and service rates.
When should I call a technician for F?
Call a technician if the error persists after checking cookware or if you notice electrical issues.
Sources & References
- Induction hob displays error code F or F1 — AEG (official)
- Hob displays message F — AEG (official)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!