AEG Dryer Error E22
⚡ Quick Answer: The AEG dryer error E22 indicates a potential malfunction in the heating element, which may prevent the dryer from generating heat. Symptoms include i... ✅ DIY Fixable
What Does Error E22 Mean?
The AEG dryer error E22 indicates a potential malfunction in the heating element, which may prevent the dryer from generating heat. Symptoms include interrupted drying cycles, damp clothes, and the E22 error displayed on the control panel. This issue may be related to the moisture sensor or internal pump circuit. Regular cleaning and maintenance of moisture sensors and lint filters can aid in resolving the problem.
Common Symptoms:
- Drying cycle interrupted or stops early
- Clothes remain damp
- Error E22 displayed on control panel
Possible Causes
- Possible moisture sensor or heating related fault (low)
- Possible internal pump sensing or control circuit issue (low)
How to Fix Error E22
DIY Fix Basic checks and cleaning
- Turn off and unplug the dryer.
- Clean the moisture sensors inside the drum with a soft cloth.
- Ensure the lint filter and condenser (if applicable) are cleaned of lint and debris.
- Restart the dryer and observe if the error persists.
Technician Only Professional diagnosis and internal inspection
- Use diagnostic tools to read service codes from the dryer control board.
- Inspect moisture sensors, temperature sensors and related wiring for faults.
- Test internal control circuits related to pump/triac components.
- Replace confirmed faulty components.
Parts needed: Moisture sensor, Temperature sensor, Control board modules, Pump or associated triac circuitry
- If error reoccurs after basic cleaning and power cycling
- If the dryer displays additional unusual behavior (smoke, burning smell)
- If internal component testing is beyond user capability
Next step
Choose the next step for E22
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 2500W |
|---|---|
| component | Heating Element |
| resistance | 10-20 ohms |
| part_number | AEG 1240000001 |
| voltage_rating | 230V AC |
Common Questions
What does E22 error mean on AEG dryer?
E22 error indicates a heating element malfunction, leading to issues like damp clothes and interrupted drying cycles.
Can I fix AEG dryer E22 error myself?
Yes, you can perform basic checks by cleaning moisture sensors and lint filters, and power cycling the dryer.
How much does it cost to fix E22 error?
Repair costs vary by model and region, depending on the specific components that may need replacement.
When should I call a technician for E22?
Call a technician if the error reoccurs after cleaning, if you notice unusual behavior, or if internal testing is beyond your capability.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!