Aeg Dryer Error E20

⚡ Quick Answer: The AEG dryer E20 error code signifies a drainage issue, often due to a blocked or kinked drain hose or an obstruction in the condensate pump. This ma... ✅ DIY Fixable

What Does Error E20 Mean?

The AEG dryer E20 error code signifies a drainage issue, often due to a blocked or kinked drain hose or an obstruction in the condensate pump. This malfunction prevents proper drainage, leading to water accumulation during or after the drying cycle, often accompanied by two beeps. To resolve the issue, check the drain hose for twists or blockages, ensure the condensate tank is emptied and reinstalled correctly, and consider inspecting the condensate pump for obstructions.

Common Symptoms:

  • Error appears during or after cycle
  • Water remaining instead of draining (condensation dryers)
  • Two beeps or two flashes may accompany E20

Possible Causes

  • Blocked or kinked drain hose (high)
  • Condensate drain or pump obstruction (medium)
  • Faulty condensate pump (medium)

How to Fix Error E20

DIY Fix Check external drain hose and tank

  1. If present, ensure the drain hose is correctly connected to a drain and not twisted or blocked.
  2. For condensation models, empty and reinstall condensate water tank firmly.
  3. Straighten any kinks and flush hose to remove debris if accessible.

DIY Fix Reset and restart appliance

  1. Unplug the dryer from mains or switch off at safety switch.
  2. Wait 30 seconds and restore power.
  3. Start a cycle to see if E20 clears.

Technician Only Inspect and clean condensate drain/pump

  1. Disconnect appliance power.
  2. Access lower front or rear to locate condensate drain channel and pump filter.
  3. Remove debris and lint from channels and pump.
  4. Verify pump impeller turns and test pump operation.
  5. Reassemble and test cycle.

Parts needed: condensate pump filter, drain hose

🛑 When to Call a Pro:
  • If after cleaning and checking hoses the E20 persists and pump shows no operation.
  • If internal wiring or pump motor appears damaged or inaccessible without professional tools.

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number AEG 1240002001
voltage_rating 230V AC

Common Questions

What does E20 error mean on AEG dryer?

E20 indicates a drainage problem, often due to a blocked hose or pump issue.

Can I fix AEG dryer E20 error myself?

Yes, check the drain hose for blockages and ensure the condensate tank is properly installed.

How much does it cost to fix E20 error?

Repair costs range from $50 to $150 for parts, depending on the issue.

When should I call a technician for E20?

Call a technician if the error persists after cleaning or if the pump appears damaged.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!