AEG Dryer Error C6
⚡ Quick Answer: The AEG Dryer C6 error indicates a malfunction with the moisture (humidity) sensor, leading to incorrect moisture detection and significantly extended... ✅ DIY Fixable
What Does Error C6 Mean?
The AEG Dryer C6 error indicates a malfunction with the moisture (humidity) sensor, leading to incorrect moisture detection and significantly extended drying cycles, often exceeding 4.5 hours. This error may also manifest with unusual noises or the drying cycle stopping unexpectedly. Proper maintenance, including cleaning the lint filter and ensuring the dryer is correctly grounded, can help alleviate issues, but a faulty sensor may require professional diagnosis and replacement.
Common Symptoms:
- Drying cycle takes significantly longer than normal (e.g., >4.5 hours)
- Cycle stops or error displayed mid‑dry
Possible Causes
- Faulty or malfunctioning moisture (humidity) sensor (high)
How to Fix Error C6
DIY Fix Check grounding and basic maintenance
- Ensure the dryer’s power socket is properly grounded (two metal earth pin present).
- Inspect and clean the lint filter, condenser unit, and any accessible moisture sensor area.
- Restart the dryer after cleaning and ensure no kinks in venting or hoses that might affect airflow and sensor performance.
Technician Only Diagnose and replace moisture sensor or related circuitry
- Disconnect power and access internal moisture sensor harness and connectors.
- Test moisture sensor resistance/voltage continuity with appropriate multimeter referencing model‑specific service data.
- Replace moisture sensor assembly or control board if diagnostics confirm failure.
Parts needed: Moisture (humidity) sensor assembly, Sensor harness/connectors, Control board if sensor signal interface is defective
- If after basic cleaning and ensuring proper grounding the C6 error persists
- If sensor diagnostics indicate failed sensor or control board issues requiring professional tools
Next step
Choose the next step for C6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Humidity Sensor
Measures relative humidity so the appliance can regulate drying or moisture removal.
- Typical part-only price
- $20 - $100
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does C6 error mean on AEG Dryer?
C6 error signifies a malfunction in the moisture sensor, causing extended drying times and possible unusual noises.
Can I fix AEG Dryer C6 error myself?
Yes, check grounding, clean the lint filter, and inspect the moisture sensor area before seeking professional help.
How much does it cost to fix C6 error?
Repair costs range from $80 to $300, depending on parts and labor in your region.
When should I call a technician for C6?
Call a technician if the error persists after cleaning and proper grounding or if diagnostics indicate sensor or control board issues.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!