Aeg Dryer Error C2

⚡ Quick Answer: The AEG Dryer C2 error indicates a drainage issue, often linked to a malfunction in the water removal system. This may include blocked drainage hoses ... ✅ DIY Fixable

What Does Error C2 Mean?

The AEG Dryer C2 error indicates a drainage issue, often linked to a malfunction in the water removal system. This may include blocked drainage hoses or a faulty water pump, resulting in the dryer not collecting water or failing to drain properly. Symptoms typically include the display of the C2 code, beeping or flashing alerts, and no water in the reservoir when an external drain is not used.

Common Symptoms:

  • Dryer displays C2 code
  • Dryer beeps twice or flashes twice and stops
  • No water collected in the reservoir (if external drain is not used)
  • Water not draining properly

Possible Causes

  • Drainage hose blockage or incorrect routing (high)
  • Water pump malfunction or obstruction (high)
  • Internal drainage software/logic fault (medium)

How to Fix Error C2

DIY Fix Check external drainage connection and hose

  1. Ensure the external drain hose (if fitted) is correctly connected to a proper drain.
  2. Check that the hose is not kinked, twisted or clogged.
  3. Make sure the hose hangs straight down into the drain without loops that can trap water.

DIY Fix Inspect water collection and basic drainage

  1. If using a collection drawer instead of a fixed drain, check if water has accumulated.
  2. Empty the water drawer and restart the dryer to see if the error clears.
  3. Ensure filters and lint traps are clean as blockages can affect drainage efficiency.

Technician Only Inspect and service pump and drainage components

  1. Disconnect power and remove access panels to examine the drain pump and internal hoses.
  2. Clean or clear any blockages inside the pump and verify that the pump spins freely.
  3. Test the pump with diagnostic tools to ensure it is pumping correctly; replace if necessary.

Parts needed: Drain pump, Internal drain hoses

🛑 When to Call a Pro:
  • If after basic user-level checks the error persists.
  • If there are signs of internal component malfunction (strange noises, no pump activity).

Technical Specifications

wattage 2500W
component Heating Element
resistance 10-30 ohms
part_number AEG 124000000
voltage_rating 230V AC

Common Questions

What does C2 error mean on AEG Dryer?

C2 error indicates a drainage fault, often due to a blocked hose or malfunctioning pump.

Can I fix AEG Dryer C2 error myself?

Yes, check the drainage hose for blockages and ensure the water collection drawer is emptied.

How much does it cost to fix C2 error?

Estimated repair costs range from $80 to $200, depending on parts and labor.

When should I call a technician for C2?

Call a technician if the error persists after your checks or if you hear strange noises.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!