Zanussi Washing Machine Error E71
⚡ Quick Answer: The Zanussi washing machine E71 error indicates a malfunction in the water temperature sensor (NTC) or its circuit. This often leads to the cycle stop... ✅ DIY Fixable
What Does Error E71 Mean?
The Zanussi washing machine E71 error indicates a malfunction in the water temperature sensor (NTC) or its circuit. This often leads to the cycle stopping and the machine displaying the E71 error code. Additionally, the water may not heat during cycles, which can negatively impact wash performance due to incorrect temperature readings.
Common Symptoms:
- Cycle stops with E71 displayed
- Water not heating during cycles
- Wash performance affected due to incorrect temperature
Possible Causes
- Faulty water temperature sensor (NTC) (medium)
- Loose or damaged wiring/connection to the temperature sensor (medium)
How to Fix Error E71
DIY Fix Basic checks before service call
- Turn off and unplug the washing machine.
- Wait a few minutes and restart a cycle to see if the error persists.
- Ensure the machine door is fully closed and the selected cycle includes heating.
Technician Only Inspect and repair temperature sensor circuit
- Verify continuity and correct resistance of the NTC temperature sensor using a multimeter.
- Inspect wiring harness and connectors between the control board and temperature sensor; repair or replace damaged wiring.
- Replace the water temperature sensor assembly if defective.
- Test the heating element and its control circuit to rule out related faults.
Parts needed: NTC temperature sensor, Wiring harness/connectors, Heating element (if secondary issues found)
- If the error persists after basic restart attempts
- If a technician-level inspection reveals broken wiring or component failure
- If there are additional error codes alongside E71
Next step
Choose the next step for E71
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E71 error mean on Zanussi washing machine?
E71 indicates a fault in the water temperature sensor, causing the cycle to stop.
Can I fix Zanussi washing machine E71 error myself?
Yes, try turning off the machine, checking door closure, and restarting the cycle.
How much does it cost to fix E71 error?
Repair costs are medium, covering sensor replacement and labor.
When should I call a technician for E71?
Call if the error persists after a restart or if you see additional error codes.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!