Zanussi Washing Machine Error E60
⚡ Quick Answer: The Zanussi washing machine E60 error indicates a malfunction in the heating system, preventing the machine from reaching the set water temperature. U... ✅ DIY Fixable
What Does Error E60 Mean?
The Zanussi washing machine E60 error indicates a malfunction in the heating system, preventing the machine from reaching the set water temperature. Users may notice the machine stops mid-cycle, fails to heat water properly, or displays incorrect temperature readings. This issue is often linked to the heating element or temperature sensor, which may require inspection or replacement.
Common Symptoms:
- Machine stops mid‑cycle with E60 displayed
- Water fails to reach set temperature
- Machine indicates overheating or incorrect temperature readings
Possible Causes
- Failure or malfunction in the heating system (heater element or temperature sensor) (high)
- Temperature sensor (NTC) incorrect readings or fault (medium)
How to Fix Error E60
DIY Fix Basic checks before service call
- Turn off and unplug the machine to reset the system, wait a few minutes, then restart
- Ensure the program selected involves heating
- If the issue persists, do not continue use to avoid possible damage
Technician Only Inspect and diagnose heating components
- Disconnect power and access the heater assembly
- Measure heating element resistance and compare to manufacturer specifications
- Test the temperature sensor (NTC) resistance at known temperatures
- Check wiring and connectors for the heater and sensor
- Replace faulty heater element or temperature sensor as needed
Parts needed: heating element, temperature sensor (NTC), wiring harness
- If error persists after basic reset and checks
- If internal component testing (heater/sensor) shows faults or you lack electrical diagnostic tools
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E60 error mean on Zanussi washing machine?
E60 indicates a heating system malfunction, causing the machine to stop mid-cycle and fail to heat water properly.
Can I fix Zanussi washing machine E60 error myself?
Yes, try resetting the machine and ensuring a heating cycle is selected. If the problem persists, further inspection is needed.
How much does it cost to fix E60 error?
Repair costs range from $30 to $120 for parts, depending on the region.
When should I call a technician for E60?
Call a technician if the error persists after a reset or if internal components show faults.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!