Zanussi Washing Machine Error E52
⚡ Quick Answer: The Zanussi washing machine E52 error indicates a malfunction in the motor drive unit, specifically a lack of signal from the motor’s tachometer to th... ⚠️ Difficulty Varies
What Does Error E52 Mean?
The Zanussi washing machine E52 error indicates a malfunction in the motor drive unit, specifically a lack of signal from the motor’s tachometer to the control board. This issue often leads to unusual noises during operation, failure to start, and erratic drum spinning. Possible causes include a faulty tachometer coil, wiring issues, or physical problems affecting the motor components.
Common Symptoms:
- Washing machine displays E52 error
- Drum may not spin or spins erratically
- Control board does not receive motor speed signal
Possible Causes
- No signal from the motor’s tachometer/tacho coil (medium)
- Wiring or connection fault between tacho coil and PCB (medium)
- Physical issues affecting the motor/tacho components (jammed motor, fallen magnet, detached tacho coil) (medium)
How to Fix Error E52
DIY Fix Basic checks and reset
- Turn off and unplug the washing machine for 10–15 minutes to clear any temporary electrical glitches.
- After power is restored, run a diagnostic or start a wash cycle to see if E52 persists.
- Try turning the drum by hand (with power off) to see if it turns freely, indicating whether the drum/motor may be mechanically jammed.
Technician Only Inspect and repair motor tachometer and related components
- Disconnect power and remove access panels to reach the motor and tachometer assembly.
- Inspect the tacho coil and magnet on the motor shaft for proper attachment and signs of damage.
- Check wiring and connectors between the tacho coil and control board for continuity and secure connections.
- If the tacho coil or magnet is damaged, replace the faulty part.
- If wiring tests good yet error persists, test/replace the motor control board PCB tach input circuits.
Parts needed: Tachometer coil/motor speed sensor, Motor magnet ring, Wiring harness, Motor control PCB
- If you are not comfortable accessing internal components (motor or PCB) or lack tools to test wiring and sensors.
- If E52 persists after basic checks and reset, indicating likely internal motor or control board fault.
Next step
Choose the next step for E52
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E52 error mean on zanussi washing machine?
E52 indicates a failure in the motor drive unit, with no tachometer signal sent to the control board.
Can I fix zanussi washing machine E52 error myself?
Yes, you can perform basic checks like resetting the machine and checking for mechanical jams.
How much does it cost to fix E52 error?
Repair costs typically range from $80 to $350+, depending on parts and labor.
When should I call a technician for E52?
Call a technician if the E52 error persists after basic checks or if you're uncomfortable accessing internal components.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!