Zanussi Washing Machine Error E36

⚡ Quick Answer: The Zanussi washing machine error E36 indicates a problem with the pressure switch or water level sensing circuit. This can prevent the machine from s... ✅ DIY Fixable

What Does Error E36 Mean?

The Zanussi washing machine error E36 indicates a problem with the pressure switch or water level sensing circuit. This can prevent the machine from starting or cause it to stop mid-cycle, often due to incorrect water level detection or a possible overflow safety trigger. Common causes include a faulty pressure switch, a blocked pressure hose, or issues in the control wiring.

Common Symptoms:

  • Machine stops mid‑cycle and displays E36
  • Incorrect water level detection (too high/low or inconsistent with programme)
  • Possible early overflow safety reaction

Possible Causes

  • Pressure switch circuit fault (medium)
  • Blocked or obstructed pressure hose/chamber (medium)
  • Faulty pressure switch (medium)

How to Fix Error E36

DIY Fix Inspect and clear pressure hose and chamber

  1. Turn off the washing machine and unplug from power.
  2. Locate the small pressure hose between the drum and the pressure switch (refer to your model's manual).
  3. Check for visible blockages, kinks or lint in the hose; carefully clear any obstruction.
  4. Gently blow through the hose to ensure it is clear.
  5. Reassemble and test a short rinse cycle to see if E36 reappears.

Technician Only Test and replace pressure switch / control wiring

  1. Disconnect the machine from the power supply.
  2. Access and isolate the pressure switch assembly and its harness.
  3. Using a multimeter, test the pressure switch for correct resistance changes under simulated pressure conditions.
  4. Inspect wiring and connectors for corrosion, breaks or poor contacts.
  5. Replace the pressure switch if it fails continuity tests or shows erratic behavior.
  6. If pressure switch checks OK, inspect main control board inputs for faults and repair as needed.

Parts needed: Pressure switch, Pressure hose, Wiring harness, Possibly main control board

🛑 When to Call a Pro:
  • If after clearing pressure hose and cleaning no change is observed
  • If the pressure switch test fails or wiring issues are suspected
  • If the machine shows additional error codes or symptoms (e.g., leaks or electrical faults)

Technical Specifications

wattage N/A
component Door Lock Mechanism
resistance 1-5 ohms
part_number Zanussi 124123456
voltage_rating 230V AC

Common Questions

What does E36 error mean on zanussi washing machine?

E36 indicates a pressure switch failure, causing the machine to stop mid-cycle or fail to start.

Can I fix zanussi washing machine E36 error myself?

Yes, you can inspect and clear the pressure hose and chamber to potentially resolve the issue.

How much does it cost to fix E36 error?

Repair costs for the E36 error range from ¥8,000 to ¥25,000, depending on parts and labor.

When should I call a technician for E36?

Call a technician if cleaning the pressure hose doesn't help, or if wiring issues or other error codes appear.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!