Zanussi Washing Machine Error E35
⚡ Quick Answer: The Zanussi washing machine E35 error indicates an overfill or overpressure condition, where excessive water has been detected in the drum. This can c... ✅ DIY Fixable
What Does Error E35 Mean?
The Zanussi washing machine E35 error indicates an overfill or overpressure condition, where excessive water has been detected in the drum. This can cause the machine to pause or stop operation, leading to a failure to fill properly. Common issues include a faulty pressure switch, pressure sensor, or excessive foaming due to too much detergent.
Common Symptoms:
- Machine displays E35 during or after fill
- Drum appears to overfill with water
- Machine may pause or stop operation
Possible Causes
- Excessive water level detected (overfill/overpressure) (high)
- Faulty pressure switch or pressure sensor circuit (medium)
- Excessive foaming due to too much detergent (medium)
How to Fix Error E35
DIY Fix Check detergent use and reset
- Ensure you are using the correct amount of high‑efficiency detergent for the load size.
- Run a rinse/spin or drain program to remove excess water and foam.
- Power off the machine, wait 2–3 minutes, then restart.
DIY Fix Check hoses and filters
- Turn off and unplug the machine.
- Inspect the water inlet hoses and drain hoses for kinks or blockages.
- Clean the pressure hose (small tube to the pressure switch) if accessible.
Technician Only Test/replace pressure switch and inspect wiring
- Diagnose the pressure switch with a multimeter to verify correct operation.
- Inspect pressure switch tubing and electrical connections for damage or leaks.
- Replace pressure switch or repair wiring if faulty.
Parts needed: Pressure switch, Pressure switch hose/tubing, Wiring harness
- If the machine repeatedly displays E35 after basic checks and resets
- If water continues to overfill or leak
- If internal pressure tubing or switch appears damaged
Next step
Choose the next step for E35
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E35 error mean on zanussi washing machine?
E35 indicates excessive water in the drum, causing the machine to pause or stop.
Can I fix zanussi washing machine E35 error myself?
Yes, check detergent use, reset the machine, and inspect hoses for blockages.
How much does it cost to fix E35 error?
Repair costs range from ¥5,000 to ¥20,000, depending on parts and labor.
When should I call a technician for E35?
Call a technician if the error persists after basic checks or if there's water leaking.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!