Zanussi Washing Machine Error E24
⚡ Quick Answer: The Zanussi Washing Machine error E24 indicates a drainage issue, often signaled by water remaining in the drum, a loud humming sound, and the display... ✅ DIY Fixable
What Does Error E24 Mean?
The Zanussi Washing Machine error E24 indicates a drainage issue, often signaled by water remaining in the drum, a loud humming sound, and the display showing the E24 code. This error typically arises from drainage blockages, such as clogged filters or hoses, or faults within the drain pump or control board. To resolve, check for blockages and test the drain function.
Common Symptoms:
- Water remains in drum and machine stops or aborts cycle
- Error code E24 displayed on panel or via LED flash patterns
- Drain phase fails or intermittently fails to pump out water
Possible Causes
- Drainage blockages (filter, pump, hose, sink/trap) (medium)
- Drain pump electrical/mechanical fault (pump motor or connector issue) (medium)
- Pump control sensing or triac circuit fault on control board (medium)
How to Fix Error E24
DIY Fix Check and clear drain blockages
- Turn off and unplug the washing machine.
- Locate and open the drain filter access panel.
- Remove and clean any debris from the filter.
- Inspect the drain hose for kinks, bends, or obstructions and clear if needed.
- Ensure the sink/trap where the hose discharges is not clogged.
DIY Fix Reset and test a drain-only cycle
- After clearing blockages, plug the machine back in.
- Select a drain or spin-only cycle to test drainage.
- Observe if water is evacuated and whether E24 returns.
Technician Only Inspect and test drain pump and associated electronics
- Test the drain pump under load for intermittent operation or failure.
- Check pump connector integrity and wiring continuity.
- Inspect the control board pump drive/triac and sensing circuitry for faults.
- Replace the drain pump or control board as necessary.
Parts needed: Drain pump assembly, Pump connector/wiring, Control PCB (if sensing circuitry is at fault)
- If water leakage is present
- If error persists after clearing blockages and basic checks
- If uncomfortable performing electrical or internal component diagnostics
Next step
Choose the next step for E24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 5-15 ohms |
| part_number | Zanussi 1240071001 |
| voltage_rating | 230V AC |
Common Questions
What does E24 error mean on Zanussi Washing Machine?
E24 error means there's a drainage issue, often with water remaining in the drum.
Can I fix Zanussi Washing Machine E24 error myself?
Yes, check and clear drain blockages, then test a drain-only cycle.
How much does it cost to fix E24 error?
Estimated repair costs range from $80 to $350+, depending on parts and labor.
When should I call a technician for E24?
Call if water leakage is present, the error persists after checks, or if you're unsure about repairs.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!