Zanussi Refrigerator Error E5

⚡ Quick Answer: The Zanussi Refrigerator E5 error indicates a malfunction in the temperature sensing system, often linked to the ambient temperature sensor or interna... ✅ DIY Fixable

What Does Error E5 Mean?

The Zanussi Refrigerator E5 error indicates a malfunction in the temperature sensing system, often linked to the ambient temperature sensor or internal sensor wiring issues. This error may cause the refrigerator to display incorrect temperature readings, potentially leading to continuous running or inadequate cooling.

Common Symptoms:

  • E5 shown on display
  • Refrigerator may run continuously or not cool correctly

Possible Causes

  • Ambient (room) temperature sensor fault (medium)
  • Internal temperature sensor wiring or connection issue (medium)

How to Fix Error E5

DIY Fix Basic Checks and Reset

  1. Note the error then power off the refrigerator.
  2. Unplug the refrigerator from mains power for about 5 minutes to allow the control board to reset.
  3. Plug back in and power on, then observe whether E5 returns.

Technician Only Inspect and Test Temperature Sensors

  1. Access the internal control area where ambient and internal temperature sensors are located.
  2. Visually inspect sensor connections and wiring harness for looseness, corrosion, or damage.
  3. Use a multimeter to test sensors for correct resistance values and continuity as per model specifications.
  4. Replace any faulty temperature sensors or repair damaged wiring.
  5. Reassemble and test refrigerator operation to verify error resolution.

Parts needed: Ambient (room) temperature sensor, Internal temperature sensors, Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after basic reset attempts and visual wiring checks.
  • If moisture, corrosion, or burned components are observed around the sensor or control board.
  • If the technician determines that the control board itself is failing or other major components are involved.

Next step

Choose the next step for E5

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E5 error mean on Zanussi Refrigerator?

E5 indicates a temperature sensor malfunction, affecting cooling and temperature display.

Can I fix Zanussi Refrigerator E5 error myself?

Yes, you can try resetting the fridge by unplugging it for 5 minutes.

How much does it cost to fix E5 error?

Repair costs range from ¥3,000 to ¥15,000 for parts, depending on the model.

When should I call a technician for E5?

Call if the error persists after a reset or if you notice damaged components.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!