Zanussi Dryer Error E72

⚡ Quick Answer: The Zanussi dryer E72 error indicates a malfunction in the temperature measurement system, often caused by a faulty or misconnected NTC temperature se... ✅ DIY Fixable

What Does Error E72 Mean?

The Zanussi dryer E72 error indicates a malfunction in the temperature measurement system, often caused by a faulty or misconnected NTC temperature sensor. Symptoms include the dryer displaying the E72 code when attempting a drying cycle, inconsistent temperature readings, and potential drying performance failure. Addressing this issue may involve checking sensor connections and ensuring proper airflow, as well as inspecting wiring integrity.

Common Symptoms:

  • Dryer displays E72 when attempting a drying cycle
  • Drying performance fails or stops
  • Temperature readings may be incorrect or inconsistent

Possible Causes

  • Faulty or misconnected temperature sensor (NTC) (medium)
  • Wiring/connectors to the temperature sensor compromised (medium)
  • Control board not receiving valid temperature signal (low)

How to Fix Error E72

DIY Fix Check sensor connections and basic airflow

  1. Unplug the dryer and ensure it is fully powered off.
  2. Inspect the external wiring or connectors to the temperature sensor for visible damage or disconnection.
  3. Clean lint filters and condenser if present to ensure proper airflow.
  4. Reconnect firmly and restart the dryer to check if the code clears.

Technician Only Test and potentially replace NTC temperature sensor

  1. Access the dryer’s internal temperature sensor location per model service manual.
  2. Measure resistance of the NTC sensor at room temperature and compare with expected values.
  3. Replace the NTC sensor if readings are outside specification or if intermittent.
  4. Verify wiring integrity and ensure secure connections.
  5. Test operation to confirm E72 is resolved.

Parts needed: NTC temperature sensor, connectors/wiring harness

Technician Only Control board inspection and repair

  1. If sensor and wiring are confirmed good, inspect control board for signs of damage or failure.
  2. Test whether the board correctly reads sensor feedback during operation.
  3. Replace control board if defective.
  4. Reassemble and verify dryer function.

Parts needed: Control board

🛑 When to Call a Pro:
  • If internal inspections reveal damaged components beyond user‑level access
  • If sensor or wiring replacements do not clear the error

Technical Specifications

wattage 2000W
component Heating Element
resistance 10-30 ohms
part_number Zanussi 1240000001
voltage_rating 230V AC

Common Questions

What does E72 error mean on zanussi dryer?

E72 indicates a temperature sensor malfunction affecting drying performance.

Can I fix zanussi dryer E72 error myself?

Yes, check sensor connections and ensure proper airflow by cleaning lint filters.

How much does it cost to fix E72 error?

Repair costs typically range from $25 to $100 for sensor replacement.

When should I call a technician for E72?

Call a technician if internal inspections reveal damaged components beyond user access.

Sources & References

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!