Zanussi Dryer Error E71
⚡ Quick Answer: The Zanussi dryer E71 error indicates a malfunction of the NTC temperature sensor, which can lead to heating issues during the drying cycle. This ofte... ✅ DIY Fixable
What Does Error E71 Mean?
The Zanussi dryer E71 error indicates a malfunction of the NTC temperature sensor, which can lead to heating issues during the drying cycle. This often results in the dryer stopping mid-cycle, failing to detect or regulate temperature correctly. To resolve the issue, basic maintenance such as cleaning vents and filters is recommended. If the error persists, further diagnosis and replacement of the faulty temperature sensor may be necessary.
Common Symptoms:
- Dryer stops mid‑cycle and displays E71
- Heating or temperature regulation issues observed
- Temperature not being detected or measured correctly during dry cycles
Possible Causes
- Temperature sensor (NTC) malfunction (medium)
How to Fix Error E71
DIY Fix Basic checks before calling service
- Turn off and unplug the dryer from power for a few minutes, then restart to see if error clears.
- Ensure that vents and lint filters are clean and not obstructed (general maintenance could reduce sensor stress).
Technician Only Diagnose and replace faulty temperature sensor
- Use service diagnostic mode (if available) to confirm E71 relates to temperature sensor fault.
- Inspect wiring and connections to the temperature sensor for damage or corrosion.
- Test the NTC temperature sensor for correct resistance values across expected temperature range.
- Replace the defective temperature sensor if faulty.
Parts needed: NTC temperature sensor, Associated wiring/connectors
- If E71 persists after basic power cycle and maintenance checks
- If the sensor wiring appears damaged or temperature readings are erratic
- If the user is not comfortable performing electrical component tests
Next step
Choose the next step for E71
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E71 error mean on zanussi dryer?
E71 error indicates a malfunction in the temperature sensor, leading to heating issues and possible mid-cycle stops.
Can I fix zanussi dryer E71 error myself?
Yes, try basic checks like power cycling the dryer and ensuring vents and filters are clean.
How much does it cost to fix E71 error?
Repair costs for the E71 error are moderate, including parts and labor for sensor replacement.
When should I call a technician for E71?
Call a technician if E71 persists after basic checks or if you're uncomfortable testing electrical components.
Sources & References
- Zanussi support article: Code d'erreur E71 (official)
- Zanussi dryer error troubleshooting (Coolblue) (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!