Zanussi Dryer Error E60
⚡ Quick Answer: The Zanussi dryer E60 error indicates a malfunction in the heating element, leading to inadequate heat during the drying cycle. This can result in wet... ✅ DIY Fixable
What Does Error E60 Mean?
The Zanussi dryer E60 error indicates a malfunction in the heating element, leading to inadequate heat during the drying cycle. This can result in wet clothes even after the dryer has run. Common causes include a broken heating element, faulty temperature sensors, or restricted airflow causing overheating detection. Proper ventilation and regular cleaning of lint filters and exhaust hoses are essential to prevent this issue.
Common Symptoms:
- No or insufficient heat during drying cycle
- Drying cycle stops with E60 displayed
- Dryer runs but clothes remain wet
Possible Causes
- Heating source malfunction (broken heating element or internal heating component) (high)
- Restricted airflow causing overheating detection or poor heat exchange (medium)
- Faulty temperature sensor, thermostat, or thermal cut‑out (medium)
How to Fix Error E60
DIY Fix Basic user checks and cleaning
- Ensure the dryer has adequate ventilation and isn’t in a confined space.
- Clean the lint filter thoroughly and empty/clean condenser if present.
- Check exhaust hose/airflow path isn’t blocked or kinked (vented models).
- Run a short cycle and feel inside after ~30 minutes to see if it warms at all.
Technician Only Diagnostic and repair of heating components
- Power off and unplug the dryer before service.
- Test continuity of the heating element; replace if open.
- Inspect and test thermostat(s), temperature sensors, and thermal cut‑outs; replace faults.
- Check wiring/connectors in the heating circuit for damage.
- Verify airflow sensors or control board signals related to heating, if applicable.
Parts needed: Heating element, Thermostat/thermal cut‑outs, Temperature sensor/NTC, Wiring/connectors
- If cleaning and basic airflow fixes do not stop the E60 error
- If heating element or sensor tests indicate faults
- If internal components are inaccessible or if unsure about electrical diagnostics
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 2000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | Zanussi 124000100 |
| voltage_rating | 230V AC |
Common Questions
What does E60 error mean on Zanussi dryer?
E60 indicates a heating element malfunction, leading to no heat during drying.
Can I fix Zanussi dryer E60 error myself?
Yes, check ventilation, clean filters, and ensure no blockages in airflow.
How much does it cost to fix E60 error?
Repair costs range from $80 to $300+, depending on parts and service.
When should I call a technician for E60?
Call a technician if basic checks don't resolve the issue or if internal components are faulty.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!