Zanussi Dryer Error C8
⚡ Quick Answer: The Zanussi dryer C8 error code indicates a malfunction in the temperature sensor, preventing the dryer from heating properly. This issue can lead to ... ✅ DIY Fixable
What Does Error C8 Mean?
The Zanussi dryer C8 error code indicates a malfunction in the temperature sensor, preventing the dryer from heating properly. This issue can lead to incomplete drying cycles and may require inspection or replacement of the faulty sensor to restore normal function.
Common Symptoms:
- Dryer displays C8 on the panel or LED
- Drying cycle may stop or not complete due to sensor fault
Possible Causes
- Defective or malfunctioning temperature sensor (high)
How to Fix Error C8
DIY Fix Check and reset basic conditions
- Turn off and unplug the dryer.
- Wait 5–10 minutes and plug it back in.
- Start a new drying cycle to see if the error persists.
Technician Only Inspect and replace the temperature sensor
- Disconnect dryer from power.
- Gain access to the internal temperature sensor (NTC) per model service manual.
- Test the sensor for correct resistance values.
- Replace the sensor if readings are outside manufacturer specifications.
- Reassemble and test the dryer.
Parts needed: Temperature sensor (NTC)
- If error C8 continues after basic reset attempts
- If dryer shows signs of overheating or unusual behavior
Next step
Choose the next step for C8
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does C8 error mean on zanussi dryer?
C8 indicates a malfunction in the temperature sensor, causing heating failure.
Can I fix zanussi dryer C8 error myself?
Yes, try resetting the dryer by turning it off and unplugging it for 5-10 minutes.
How much does it cost to fix C8 error?
Repair costs range from $30 to $120 for the temperature sensor plus labor.
When should I call a technician for C8?
Call a technician if the C8 error persists after a reset or if there are signs of overheating.
Sources & References
- Tumble dryer displays error message C8 (official)
- Der Wäschetrockner zeigt die Fehlermeldung C8 an (official)
- Droger geeft foutmelding C8 op het display weer (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!