Wolf Warming Drawer Error 60

⚡ Quick Answer: The Wolf Warming Drawer error code 60 indicates excessive internal temperature, likely due to a malfunctioning temperature sensor or a stuck relay. Th... ✅ DIY Fixable

What Does Error 60 Mean?

The Wolf Warming Drawer error code 60 indicates excessive internal temperature, likely due to a malfunctioning temperature sensor or a stuck relay. This can lead to erratic temperature readings and may cause the unit to shut down heating functions. If the drawer displays '60' even at lower set temperatures, it's crucial to address this issue promptly to avoid further malfunction.

Common Symptoms:

  • Display shows "60" on control panel
  • Unit may shut down heating or not function normally
  • Error occurs even at lower set temperature

Possible Causes

  • Excessive internal temperature detected (overheat) (high)

How to Fix Error 60

DIY Fix Basic reset and ambient check

  1. Ensure ambient installation conditions are within specification (no direct sunlight or extreme heat)
  2. Turn off the home circuit breaker to the warming drawer for 30 seconds and then turn it back on to reset the control
  3. Attempt normal operation and observe if error returns

Technician Only Inspect and test thermal sensing and control components

  1. Disconnect power and access warming drawer internal components
  2. Inspect thermistor (temperature sensor) and wiring for damage or loose connections
  3. Test heating element relay and control board outputs for proper operation
  4. Replace faulty thermistor, relay, or control board as indicated by tests

Parts needed: Thermistor/temperature sensor, Control board, Heating element relay

🛑 When to Call a Pro:
  • If error code persists after reset and basic checks
  • If unit overheats or will not cool down normally
  • If internal components cannot be safely accessed for testing

Next step

Choose the next step for 60

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Thermistor

Measures precise temperature changes and sends resistance feedback to the control board.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

$15 - $35 · Easy · 15-30 mins

Check fit & price
Model number required

Model-compatible Warming Drawer parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 300W
component Temperature Sensor
resistance 5-15 ohms
part_number Wolf 820210
voltage_rating 120V AC

Common Questions

What does 60 error mean on Wolf Warming Drawer?

Error 60 means the unit has detected excessive internal temperature, likely due to a faulty temperature sensor.

Can I fix Wolf Warming Drawer 60 error myself?

Yes, you can try resetting the unit and checking the ambient conditions. Turn off the circuit breaker for 30 seconds to reset.

How much does it cost to fix 60 error?

Repair costs for the 60 error can range from $100 to $400, depending on parts and labor.

When should I call a technician for 60?

Call a technician if the error persists after a reset, if the unit overheats, or if internal components are not safely accessible.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!