White Westinghouse Refrigerator Error CR
⚡ Quick Answer: The CR error code on your White Westinghouse Refrigerator indicates a failure in the compressor relay, which may lead to unusual clicking sounds and i... ✅ DIY Fixable
What Does Error CR Mean?
The CR error code on your White Westinghouse Refrigerator indicates a failure in the compressor relay, which may lead to unusual clicking sounds and inconsistent cooling. This issue often arises from a communication failure between the control/display board and the main control board, potentially causing the control panel to become unresponsive and auxiliary functions to malfunction.
Common Symptoms:
- Error code CR displayed on control panel
- Control panel may become unresponsive or default to last known settings
- Auxiliary functions (dispensers, sensors) may not operate correctly when CR present
Possible Causes
- Communication failure between control/display board and main control board (medium)
How to Fix Error CR
DIY Fix Power Reset to Attempt Clear CR Error
- Unplug the refrigerator from the power outlet.
- Wait at least 5 minutes to allow internal electronics to discharge.
- Plug the refrigerator back in and check if the CR code clears.
Technician Only Diagnose and Repair Control Communication Fault
- Inspect wiring harnesses and connectors between the display/control board and main control board for loose connections, corrosion, or damage.
- Test communication lines for continuity using a multimeter.
- Replace faulty control board(s) or wiring as identified.
- Verify proper operation and clear error codes following repair.
Parts needed: Control/display board, Main control board, Connector harness
- If CR error persists after a proper power reset and components appear intact.
- If there is evidence of damaged wiring, burnt electronics, or intermittent control panel behavior.
Next step
Choose the next step for CR
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Compressor Relay |
| resistance | 0-5 ohms |
| part_number | WR07X10005 |
| voltage_rating | 120V AC |
Common Questions
What does CR error mean on White Westinghouse Refrigerator?
CR error indicates a compressor relay failure, causing cooling issues and clicking sounds.
Can I fix White Westinghouse Refrigerator CR error myself?
Yes, try a power reset by unplugging the fridge for 5 minutes to see if it clears the error.
How much does it cost to fix CR error?
Repair costs for the CR error range from $120 to $400, depending on the region and appliance model.
When should I call a technician for CR?
Call a technician if the CR error persists after a power reset or if you notice damaged wiring or burnt electronics.
Data last verified: 2026-04-23
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!