White-Westinghouse Air Conditioner Error P2
⚡ Quick Answer: The White Westinghouse Air Conditioner P2 error indicates a drainage issue, typically due to a high water level or a full internal condensate tank. Th... ✅ DIY Fixable
What Does Error P2 Mean?
The White Westinghouse Air Conditioner P2 error indicates a drainage issue, typically due to a high water level or a full internal condensate tank. This may result in water pooling around the unit and unusual sounds from the drainage system. When this error occurs, the unit stops cooling, and you may hear audible water movement inside the unit. Addressing this issue promptly is essential for the optimal functioning of your air conditioner.
Common Symptoms:
- Unit stops cooling when P2 is displayed
- Audible water movement or presence of water inside the unit
Possible Causes
- Full internal condensate tank or high water level detected (medium)
- Blocked drain path or poor drainage (medium)
- Faulty water level float switch (low)
How to Fix Error P2
DIY Fix Drain condensate and check drainage
- Turn off and unplug the unit for safety.
- Locate the drain plug or internal condensate tank access (usually bottom/rear).
- Place a tray or shallow pan beneath and remove the plug to drain water.
- Check for blocked hoses or ports and clear any debris.
- Ensure the unit is level or slightly tilted per manufacturer recommendations.
- Plug in and restart the unit to see if the P2 error clears.
Technician Only Inspect and service internal drainage components
- Verify proper operation of the water level float switch or internal sensor.
- Clean or replace the float switch if it fails to move freely.
- Inspect and clear any internal drain lines or ports thoroughly.
- Check unit leveling and reinstall or adjust mounting if necessary.
Parts needed: Float switch or water level sensor, Drain hose or port components
- If draining and basic drainage maintenance do not clear the P2 error.
- If water appears to be leaking into unintended areas or components are visibly damaged.
- If internal sensor or float switch cleaning does not restore normal operation.
Next step
Choose the next step for P2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Browse by model — no specific failed part is claimed
Model-compatible Air Conditioner parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Air Conditioner Fin Cleaner
For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.
Model-Compatible Washable AC Filter
A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 5-15 ohms |
| part_number | WPW10195053 |
| voltage_rating | 115V AC |
Common Questions
What does P2 error mean on White Westinghouse Air Conditioner?
P2 indicates a drainage issue, often due to a full condensate tank or high water level.
Can I fix White Westinghouse Air Conditioner P2 error myself?
Yes, you can drain the condensate tank and check for blockages in the drainage system.
How much does it cost to fix P2 error?
Estimated repair costs range from $50 to $150, depending on parts and labor.
When should I call a technician for P2?
Call a technician if basic drainage maintenance doesn't resolve the error or if there are signs of leaks.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!